TL1000r Electrical gremlins

[Fisty]

I fitted a new engine to the TL last week, the engine in it was running fine but the gearbox was shot.

With the new engine in im getting 2 fault codes, one for the cam position sensor, the other for thr crank position sensor. Both of these have been replaced with known working ones but the fault code sill comes up.

Any suggestions?

Tom
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[Jenks]

have you reset it tom?

I know the zuki FI ones can be like this for no reason, cant remember the reset codes offhand though,theres one with disconnecting the battery, and one with the kill switch
____________________
1978 MZ TS 250 1 Supa 5
1992 yamaha fzr1000 exup
1998 aprilia af1 sintesi

[Fisty]

Not tried but will do in the morning!!! whats with the killswitch?
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[Jenks]

erm, i cant remember exactilly, but you can run a code with it, like on off on off on off on off or so 5 times or something. Really cant remember exactilly, but id go for the battery method.

Know that ones easier
____________________
1978 MZ TS 250 1 Supa 5
1992 yamaha fzr1000 exup
1998 aprilia af1 sintesi