Reccomend me a Workshop - London

[squishio]

Hi All

I have done something bad to my Hyosung GT650, I thought it was the clutch as there is a common fault with the gt650 clutch but I have taken it off and the shaft wobbles and the gearbox shaft is rattly and crunchy

So, lacking a garage I really cant be bothered breaking the engine apart myself and am happy to pay someone for the pleasure of seeing them do it, however, the dealer I got it from (Bat Motorcycles in Biggin Hill) have closed down and I don't really know any other local decent garages.


So, could some one recommend a good workshop in North London that...
A. is good from personal experience and...
B. will work on a hyosung and not just tell me to get stuffed because it's a bit different.

Thanks!
Richard

I'm in North London, and can stick the bike on a van to move it.
____________________
Current - Hornet 600, Transalp 650, X140 Pit, GPZ400R
Past - SY125, GT250, GT650, CX400, CBF600, Bandit 600, SL1000, GT250

[Vincent]

Sounds like the bearing on the drive shaft, could you have overtightened the chain at all

[squishio]

Very possibly.
My chain got a very very tight spot a few weeks ago, had to ride it like that for a few days. I changed it approx 3 weeks ago and it has been fine since.

I can't really be bothered thinking about it, I've only had the bike about 2 months, just want to get it fixed and back on the road.
In the meantime I'm back on my reliable hyo GT250
____________________
Current - Hornet 600, Transalp 650, X140 Pit, GPZ400R
Past - SY125, GT250, GT650, CX400, CBF600, Bandit 600, SL1000, GT250