Sourcing parts

[Cptn. Awesome]

If somebody could help me sourcing a couple of parts I'd be greatly appreciated. Basically I need a lower left hand fairing for a '03 Kawasaki ZX6R B1H and I believe it's a crank cover (see attached. It might not be though, I'm not very technical) .

I've scoured eBay and if possible I'd like a good condition second hand panel in the correct colour with decals etc already on. BTW the bike in the attached pic is the same colour and model as mine.

All help appreciated.
____________________
Rides - '60 Plate Ford Fiesta Zetec 1.25, '03 Plate Kawasaki ZX6R B1H and an '87 VFR400 NC24

Naughty Fawbish: "An eagle is but an eagle until the suns flare blinds his prey." - Fawbish, 2010.

[iooi]

parts Gateway might be of use as it emails lots of parts dealers.
____________________
Just because my bike was A DIVVY, does not mean i am......

[chris-red]

There is nothing attached but the RHS engine cover is probably a clutch cover.

Try your dealer for the casing I shocked when the alternator casing for my Triumph was £36 from a dealers, I expected treble that price, they will rape you for the fairing mind.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.

[Cptn. Awesome]

[chris-red]

I swear the original post said right, did you alter it?


Anyway that would be the alternator casing I believe, from Triumph it cost me £36 for the casing and £11 for the gasket.

Fairing:- from a dealer probably £200+ you may get luck on ebay, otherwise if it is not to badly damaged get it repaired and resprayed.

The graphic will be about £30 I believe, not sure about the spray job but as it is all one colour maybe £100 with abit of plastic welding too.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.

[Cptn. Awesome]

*BUMP*

Just popped an email off to Skidmarx, I ordered a full front fairing set for the VFR when I smashed that and it was pretty good quality so I figured it's worth a try plus their prices aren't too bad.
____________________
Rides - '60 Plate Ford Fiesta Zetec 1.25, '03 Plate Kawasaki ZX6R B1H and an '87 VFR400 NC24

Naughty Fawbish: "An eagle is but an eagle until the suns flare blinds his prey." - Fawbish, 2010.

[Welshd1k]

probaly cheaper to get them NRG(SP) indestructable genny cover vs stock kawa one i knwo for a zxr400 they wanted 81+ vat for one and them bling ones are 90 odd new so ,,,
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<

[The Tot]

NRC engine covers (Niagara Racing Company) - I believe they're made from thicker castings than stock so they'd protrude more than OEM.

Fairingwise, have you tried Motocc.co.uk

https://www.motocc.co.uk/acatalog/Kawasaki_ZX-6R_2003_-_2004.html

here's the link for your bike. I believe they come well rated by PB. For the price of a skidmark fairing + painting, you could be better off paying 200 more and having spares?
____________________
The Tot 2007 Yamaha R1 4C8 2002 Yamaha FZS1000 Fazer &
www.youtube.com/Titot182 for your bike gear reviews and pop punk covers
Earl Of Easycore Pop Punk Will Never Die!

[tutton]

https://cgi.ebay.co.uk/Kawasaki-ZX6RR-K1H-599cc-05-Left-Fairing-Unmarked-ZX636-/270297526236?cmd=ViewItem&pt=UK_Motorcycle_Parts&hash=item3eeefcefdc

may be of interest.
____________________
Past: '05 Peugeot XPS '99 Aprillia RS125 '94 FZR600R
Current: '02 ZX636 A1P '51 CCM R30

[Cptn. Awesome]

[Cptn. Awesome]

Out of curiosity, can the NRC covers be sprayed? Just they look a bit w*nk if they can't.
____________________
Rides - '60 Plate Ford Fiesta Zetec 1.25, '03 Plate Kawasaki ZX6R B1H and an '87 VFR400 NC24

Naughty Fawbish: "An eagle is but an eagle until the suns flare blinds his prey." - Fawbish, 2010.

[Mr.Everready]

You should be able to spray anything.

Cover here also https://cgi.ebay.co.uk/Kawasaki-ZX636-B1H-B2H-Chrome-Generator-Casing-NEW-/190348907600?cmd=ViewItem&pt=UK_Motorcycle_Parts&hash=item2c51add450

I've a clutch cover and gasket in the garage if you drop it on the other side in future !
____________________
the undemocratically unelected mod of the Scottish section

[Mr.Everready]

PS Get a post on www.mcnninjas.co.uk and see if anyone has the parts you need.
____________________
the undemocratically unelected mod of the Scottish section

[chris-red]

[Cptn. Awesome]

Have joined MCN Ninjas.

Chris, what's wrong with a chrome engine cover? I think it looks canny but it wouldn't go with the other covers on mine.
____________________
Rides - '60 Plate Ford Fiesta Zetec 1.25, '03 Plate Kawasaki ZX6R B1H and an '87 VFR400 NC24

Naughty Fawbish: "An eagle is but an eagle until the suns flare blinds his prey." - Fawbish, 2010.

[Mr.Everready]

[chris-red]

[Cptn. Awesome]