Supermoto conversion

[maully]

Basically as the tittle says. Ive currently got a 1991 CRM125, and have brought some NSR Wheels for it upon reading somewhere that they got straight on to the CRM. The current tires need changing so just wanted to double check that the wheels will go straight on before ordering the tires.

any help or info would be great cheers alex

[hmmmnz]

ahh the old someone said it would fit story

you have a few variables,
firstly, the axle sizes, crm front- 15mm crm rear - 17mm nsr f-15mm r 17mm
so that sweet,
next variable is brake rotor, 240mm front on the crm dunno what the rear is and don't know what the nsr uses,
next variable is the brake off set,
next is the spacers,
next is the cush drive on the back


i doubt its just a straight swap, it might be as minor as changing the spacers,
but it could be that you have to modify the torque arm for the rear caliper, off set the front caliper and make new spacers,


worth a try, i managed to make bandit 6 wheels fit a gs500 with quite a bit of work

good luck
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches