Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


need advice on a fazer 600

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

snowsurfer
Scooby Slapper



Joined: 24 Jun 2009
Karma :

PostPosted: 21:43 - 30 Aug 2010    Post subject: need advice on a fazer 600 Reply with quote

rite just back from seeing the above, and lookin for your opinions

its a 99 t reg with 27000 miles, looks in ok nick, nothin special, downpipes are a bit rusty but still solid, front forks have a slight pitting but no patches of rust, bodywork is ok, few scuffs but nothin major, end can looks ok, would prob change that anyway. only worry is that 2 of the carb seals (the seal between the carb and the cylinder block) are perishing and are covered in tape for the moment to maintain the seal, the guy tells me they are a fiver each and easy to fit, anyone confirm or rubbish this claim?

the bike is on ebay just now, but about to finish with no bids, i asked him how much he was lookin for it and all he said was he bought it 4 months ago for 1275 so assumin he's lookin for most of that back but because he's got no bids im hoping he'd accept less

what do you guys think? sound ok? should i be comfortable that the fazer is a reliable bike and shouldnt have much go wrong and what would yous be willing to pay?

cheers in advance (karma cookies for helpful/amusing responses)
____________________
Past Bike: 07 Honda xr125l
Current Bike: 99 Yamaha Fazer 600
 Back to top
View user's profile Send private message You must be logged in to rate posts
Blau Zedong This post is not being displayed because the poster is banned. Unhide this post / all posts.

Welshd1k
World Chat Champion



Joined: 03 Oct 2006
Karma :

PostPosted: 22:19 - 30 Aug 2010    Post subject: Reply with quote

my mates v plater with 29k has all the inlet rubbers crackin ....


i THINK they cost him £27 or so for all 4 new ones
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<
 Back to top
View user's profile Send private message You must be logged in to rate posts

snowsurfer
Scooby Slapper



Joined: 24 Jun 2009
Karma :

PostPosted: 22:21 - 30 Aug 2010    Post subject: Reply with quote

found these on ebay
https://cgi.ebay.co.uk/YAMAHA-FZX750-FAZER-CARB-INLET-RUBBERS-/130417671969?pt=UK_Motorcycle_Parts

assuming theyre the parts, admittedly for a different bike, but 20 quid for 4 used so guessin that a fiver for a new one is rubbish, will check with a garage tomorrow to make sure
____________________
Past Bike: 07 Honda xr125l
Current Bike: 99 Yamaha Fazer 600
 Back to top
View user's profile Send private message You must be logged in to rate posts

Welshd1k
World Chat Champion



Joined: 03 Oct 2006
Karma :

PostPosted: 22:35 - 30 Aug 2010    Post subject: Reply with quote

i looked in gogole busters do them £62 for all 4 brand new. but im almost certain my mate got a set for under £30 i shall ask
____________________
Current >Cb600fx hornet, ns125rk90 21.7bhp@wheel<
Sold >,zxr400 h2 (33bhp kit) rd350 n1 rd350 lc2<
 Back to top
View user's profile Send private message You must be logged in to rate posts

snowsurfer
Scooby Slapper



Joined: 24 Jun 2009
Karma :

PostPosted: 23:36 - 30 Aug 2010    Post subject: Reply with quote

cheers for the answers guys, not offput by the inlet rubbers, sounds like a consumable that needs changed, will just haggle some money off for them to be done, does the rest off it sound ok to yous, am considering offering 900 for it, if i dont ask i dont get eh
____________________
Past Bike: 07 Honda xr125l
Current Bike: 99 Yamaha Fazer 600
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 16:19 - 31 Aug 2010    Post subject: Reply with quote

my fazer has cracked all 4 rubbers too. i have replaired them with some silicone glue and electrical tape. they are fine. i bought mine with 29000 miles on it, needing a service, rear tyre and tax for £925, so bare that in mind (Y)
 Back to top
View user's profile Send private message You must be logged in to rate posts
N cee thirty This post is not being displayed because the poster is banned. Unhide this post / all posts.

snowsurfer
Scooby Slapper



Joined: 24 Jun 2009
Karma :

PostPosted: 20:07 - 31 Aug 2010    Post subject: Reply with quote

sounds like i made the right choice then, heres how it went

was workin 7am to 7 pm today so didnt have much time to watch auction, anyway logged onto mobile ebay in the factory to find that someone had put in the starter bid of £650, so after a few minutes of thinkin i decided to bid max of 800 and if i get it i get it, auction ended at £713.67

so for 700 quid i got a 99 fazer with a years mot and in good order, absolutly delighted!!! cannot fuckin wait!! pick it up on friday if i can arrange a lift into glasgow before 1pm so heres hopin, just need to sort insurance and tax it before friday which shouldnt be a problem

well chuffed!!!!!!
____________________
Past Bike: 07 Honda xr125l
Current Bike: 99 Yamaha Fazer 600
 Back to top
View user's profile Send private message You must be logged in to rate posts
N cee thirty This post is not being displayed because the poster is banned. Unhide this post / all posts.

kitty kat
World Chat Champion



Joined: 20 Jun 2007
Karma :

PostPosted: 22:05 - 31 Aug 2010    Post subject: Reply with quote

Hope you enjoy the fazer. I have an 01 with 87000 miles on it. It gets ridden in all weathers and still runs sweet (no cracked anything on it).
They only thing I have ever replaced are front wheel bearings, fork seals, rear brake disc and the obvious like brake pads, c & s and tyres.
____________________
Enjoy everyday, tell those you love everyday you love them
Life is too short to fall out with people
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 16 years, 3 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.91 - MySQL Queries: 14 - Page Size: 69.61 Kb