Does the CB500 have serviceable Swingarm Bearings

[Ingah]

Been reading about "greasing the swingarm bearings" (in a motorcycle magazine).

Just wanted to confirm - the CB500, does not have greaseable swingarm bearings does it? (is it a sportsbike only thing?) I just have never seen any mention of it in the Haynes manual, nor on CB500 websites.
____________________
-- Ingah

[neil.]

It may have bushes with no bearings, and seals to keep grease inside the bushes, if it's anything like the YBR. Does the service manual mention re-greasing swingarm bushes at all? I'm supposed to do it every 16'000 miles but it's a right pain as you need to remove the exhaust and everything else at the back and replace the seals. Does the Haynes mention it at all even in the 'frame/suspension' chapter, might be just a mention of it when re-assembling the swingarm to the frame, rather than it being a service item?
____________________
CBT February 2008 | A2 June 2008 | Yamaha YBR125 (written off) | Honda CBF125 (current)