NS125 bits for sale -- UPDATE -- ALL SOLD --

[Ian (GPX)]

These are for the NS125F/R and not the NSR125.

Open to offers on these bits.

Front Brake Calliper

Front wheel with good tyre (no disc)

Rear wheel and brake unit with good tyre (needs new sproket)

Exhaust (original pipe, no holes, just minor dents), will include new un-opened gasket.

Clocks -- NS125F

Forks -- may need a little work on them, like new seals etc

Radiator (in good clean conditon)

Fuel tank (white, has small dents, no key for petrol cap, so lock would need to be drilled out)

Carb

Engine -- Not known if it runs, but would come in handy for spares

PM me if your interested in any of these bits.

[iheartpie]

sounds like ur rippin it apart....are u gettin rid of the LH handle bar...i need a new mirror/clutch lever bracket etc......?
____________________
brooooom, BROOOOommmm
https://www.mrnathan.cjb.net

[Ian (GPX)]

[nsr125sp]

Have you got the two engine spacers on the front where the bolt goes though? and if so will they fit an nsr foxeye?

[Chuck100]

Do you have the wiring loom - particularly the bits around the battery (i.e. connectors, fuses, diodes, starter relay switch)? Some knobber broke into my bike and knicked the above bits.

Cheers,

Chuck.
____________________
I shall see you, sir, upon the hustings

[P_J]

Does anyone know if the exhaust off the above mentioned NS, will fit the NSR?


Cheers
PJ
____________________
Dreams will get you nowhere, a good kick up the arse will take you a long way.
Only1PJ.co.uk

[bencooper]

wot will u take for the exhust and engine i got a ns125f but i need a new exhaust and topend and a seat and where do u live i live in essex
ben

[Ian (GPX)]

All the bits I had for sale have now gone.

[Danny]

Where did the buyer see the advert Ian?