KINDA URGENT - Bloody valve clearances

P.addy · Red Rocket Joined: 14 Feb 2008 Karma :

Really annoying me now.

If anyone has the manual for the cbr125, could they let me know the valve clearances... Internet says 0.06 and 0.25... But other places say 0.04 and 0.11 Sad

I'd trust it from someone here!

If you could help asap that would be cool as the bike is chilling with it's cover off atm Laughing

Kickstart · The Oracle Joined: 04 Feb 2002 Karma :

Hi

Autodata book lists it as 0.04~0.08mm inlet and 0.25~0.29 exhaust.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

whitedevil · World Chat Champion Joined: 28 Nov 2010 Karma :

i found this posted on a cbr125 forum:
In the Haynes manual it says Intake 0.06mm (0.04 to 0.08 mm range)
Exhaust 0.27mm (0.25 to 0.29 mm range)

several other posts agreed

P.addy · Red Rocket Joined: 14 Feb 2008 Karma :

Thanks both of you...

Now I'll pass that on and let the guy get on with it Smile

Thanks again

stinkwheel · Bovine Proctologist Joined: 12 Jul 2004 Karma :

In general with small hondas, as long as there is a gap of some sort, you're good to go.

It's when there is no gap, you are in trouble.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.