cb100n problem

vmax12 · Renault 5 Driver Joined: 13 Sep 2009 Karma :

hi guys, im slowly restoring this little 4stroke and after draning oil and cleaning oil filter which was covered in bits of a mashed up piston ring i tryed to take off the right side caseing where the kickstart and clutch are and for god sake it wont come off Brick Wall

all bolts are out and the caseing pulls freely half way off the kick start shaft and stops.....wont come off all the way.....i carnt see what else is stopping it. could it be something to do with the clutch arm still being in contact with clutch basket/plates? but as its come away about an inch i carnt see how its still makeing contact.. its totaly doin my box in........or is it to do with the kickstart inards? cheers for any help....i will put a hammer to it if theres no other way lol.... again cheers

mysterious_rider · World Chat Champion Joined: 11 Sep 2010 Karma :

have you taken the kickstarter off?

vmax12 · Renault 5 Driver Joined: 13 Sep 2009 Karma :

2E · Trackday Trickster Joined: 20 Jun 2008 Karma :

Tried using a rubber mallet and 'persuading' it off?
____________________
Bringing Classic Bikes Back Into Fashion
Rides: 1980 Honda CX500

zene · Two Stroke Sniffer Joined: 18 Sep 2010 Karma :

not the same bike, but in a honda xl i was doing i had the side stand on the way preventing the casing to come off!

G and J recovery · Two Stroke Sniffer Joined: 03 Oct 2010 Karma :

pop the kick start back on and push the kick start untill you feel the case moves of more and free,s up,
the kick start spring may pop of to tho
____________________
glen

vmax12 · Renault 5 Driver Joined: 13 Sep 2009 Karma :

still wont pull off Mad

thanks anyway guys