Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Chain Tension, couple Questions please.

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

Alex_B
Brolly Dolly



Joined: 15 Jul 2011
Karma :
PostPosted: 14:38 - 24 Sep 2011    Post subject: Chain Tension, couple Questions please. Reply with quote
Hey gents.

Question 1.

When adjusting the Chain and looking for that right amount of tension are the specs with the bike loaded? I mean, if it's on the center stand it's going to be pretty slack right?

So if my Haynes recommends 30mm or whatever is it talking about the bike at rest on the side stand or with someone on it?

I think that's what I mean. Wink

Question 2.

What's the easiest way to determine correct wheel alignment after above job is done and dusted please?
I have actually adjusted the chain and the manual mentions the marks "matching" but tbh I can't see em. Laughing

So, there is the string method, way to much hassle to read through though.

Just a quick and dirty way would be great, would a tape measure from the rear axle to the same fixed point on each side of the bike be fine?

Old news to you guys that have done this shit for years but for me it's all new so please bear with me. Thumbs Up

Thanks all.
____________________
My Lane Position is always AWESOME!!
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 15:15 - 24 Sep 2011    Post subject: Reply with quote
Hi

Normally the chain tension is without any load on it.

The marks on the swinging arm are not that useful, even if you can see them. Too often inaccurate. Get it right using a couple of straight bars (or using string) and after that just make sure you turn the chain adjusters the same number of flats to keep it straight.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Alex_B
Brolly Dolly



Joined: 15 Jul 2011
Karma :
PostPosted: 16:05 - 24 Sep 2011    Post subject: Reply with quote
Kickstart wrote:
Hi

Normally the chain tension is without any load on it.

The marks on the swinging arm are not that useful, even if you can see them. Too often inaccurate. Get it right using a couple of straight bars (or using string) and after that just make sure you turn the chain adjusters the same number of flats to keep it straight.

All the best

Keith


Thanks Keith.

Really, it seems a bit tight when loaded. I worry that can't be right. Forgive me if I'm in the wrong here.

Loaded, on the side stand I have it about right but unloaded it's pretty much to slack.

So, lets get this 100% if we can.

When riding, the chain is loaded (duh??) so I want my 1 to 1/4" SLACK when I'm sitting on it?

Sorry mate, lil bit worse for wear as I had a tough day and have lessened that with copious amounts of Vodka Laughing

Thanks for taking the time mate Smile
____________________
My Lane Position is always AWESOME!!
 Back to top
View user's profile Send private message You must be logged in to rate posts

el_oso
World Chat Champion



Joined: 17 May 2008
Karma :
PostPosted: 16:36 - 24 Sep 2011    Post subject: Reply with quote
don't adjust your chain after you had the vodka
____________________
Duke 390
Previous: '05 XR125L | '96 XJ600S Diversion |'05 Suzuki GSXR1000 | '05 Honda CBR125-R | '97 YZF 600R Thundercat | '11 Honda CBR250
Car: Jeep Wrangler 4.0L
 Back to top
View user's profile Send private message You must be logged in to rate posts

Alex_B
Brolly Dolly



Joined: 15 Jul 2011
Karma :
PostPosted: 17:34 - 24 Sep 2011    Post subject: Reply with quote
the_godfather wrote:
don't adjust your chain after you had the vodka
No, no. This was before Laughing

I think I have it but I want to be sure with the wheel alignment more than anything now Laughing
____________________
My Lane Position is always AWESOME!!
 Back to top
View user's profile Send private message You must be logged in to rate posts

whitedevil
World Chat Champion



Joined: 28 Nov 2010
Karma :
PostPosted: 17:42 - 24 Sep 2011    Post subject: Reply with quote
https://www.youtube.com/watch?v=RBxK-OQ--fg
____________________
GPZ500 sold ~ CBR600FS-2 sold ~ ZX6R sold ~ Street Triple R
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 22:26 - 24 Sep 2011    Post subject: Reply with quote
Alex_B wrote:

Loaded, on the side stand I have it about right but unloaded it's pretty much to slack.


As long as there is a bit of slack then it should be OK. The slack is there to allow the suspension to move. With the rear wheel spindle, swinging arm spindle and gearbox output shaft in line the chain will be at its tightest, and the slack should be enough that the chain can cope with this without being stressed. The recommended slack should be enough when not loaded so that it can compress. Hence why the amount varies between bikes, as the length of the swinging arm and distance from the spindle to the gearbox sprocket varies (and so the amount by which the chain gets tighter).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 138 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.07 Sec - Server Load: 0.41 - MySQL Queries: 14 - Page Size: 54.69 Kb