ZX6 help needed

[kev]

Nothing major really I just need to know the size allen key I need to remove the front wheel.


Thanks

Kev.

[Ste]

22mm.

I've got no phone reception.

[Kickstart]

Hi

Texted the size to him.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing

[Phoenix]

Well congratulations to Alf's of worthing who told me it was 16mm upto and including J models and 17mm after, impressive fuckup for a Kawasaki dealer.

[kev]

Thanks for the help got one ordered.
____________________
20:02:36 Jammy-R6: any holes a goal
20:02:48 kev: even if its a hairy mans arse
20:02:56 Jammy-R6: hell yes

[G]

It may be 17mm as well.
However the bigger side is 22mm, and this is the side of the actual axle, rather than just the holder.

This is for the G/J/A models, not sure about F or A models.

[kev]

I have everything up to 19mm and ordered a 22mm today so I should be ok.
____________________
20:02:36 Jammy-R6: any holes a goal
20:02:48 kev: even if its a hairy mans arse
20:02:56 Jammy-R6: hell yes

[kev]

It turns out you don't need a 22mm one after all, all you do is leave the pinch bolts done up, remove the nut the other side which was a 17mm allen bolt, release the pinch bolts and push the spindle out.

[ZaphodBeeble]

Bah, never mind you will have a spare 22mm allen key now for those big old allen key holes.
____________________
Current bike: VTR1000F Firestorm. Previous: Firestorm (written off) - XJ600 Divvy - NSR125 - DT125 and a load of offroaders.