Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Silicone + Handlebars = no grip!

Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :

PostPosted: 14:35 - 07 Nov 2011    Post subject: Silicone + Handlebars = no grip! Reply with quote

I was sealing something on the exhaust with silicone sealer on my bare hands, and I had to move the bike, I'd rubbed most of it off my hands so I thought it would be fine, but there's a thin layer on the handlebars and now my gloves...

My gloves are just slipping round the throttle now which means I have to squeeze quite hard when I'm applying it.

Is there any way to remove this stuff? It's a non-visible layer on my gloves and bars and I just can't think how to get it off.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

porndoguk
Renault 5 Driver



Joined: 07 Mar 2011
Karma :

PostPosted: 14:39 - 07 Nov 2011    Post subject: Re: Silicone + Handlebars = no grip! Reply with quote

snorty wrote:
I was sealing something on the exhaust with silicone sealer on my bare hands, and I had to move the bike, I'd rubbed most of it off my hands so I thought it would be fine, but there's a thin layer on the handlebars and now my gloves...

My gloves are just slipping round the throttle now which means I have to squeeze quite hard when I'm applying it.

Is there any way to remove this stuff? It's a non-visible layer on my gloves and bars and I just can't think how to get it off.


Shocked

something like brake cleaner or neat alchohol,

live and learn and count your self lucky you aint got hurt!
 Back to top
View user's profile Send private message You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 14:46 - 07 Nov 2011    Post subject: Re: Silicone + Handlebars = no grip! Reply with quote

Sandpaper.
 Back to top
View user's profile Send private message You must be logged in to rate posts

porndoguk
Renault 5 Driver



Joined: 07 Mar 2011
Karma :

PostPosted: 14:52 - 07 Nov 2011    Post subject: Reply with quote

its worth buying these when working on the bike,

https://www.dirtbikebitz.com/renthal-clean-grips-p-2577.html

i always do,

spray hair spray on your gloves for riding/racing etc, and youll have wicked grip Smile
 Back to top
View user's profile Send private message You must be logged in to rate posts

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :

PostPosted: 18:08 - 07 Nov 2011    Post subject: Reply with quote

Tried the sandpaper method, did the gloves and handlebars, no joy, I might just wait and hope it wears off over time slowly. The layer is so thin so perhaps the alcohol will work.

Glad I didn't get any on my tyres this stuff is slippy as hell.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

DrDonnyBrago
World Chat Champion



Joined: 03 Jan 2010
Karma :

PostPosted: 19:08 - 07 Nov 2011    Post subject: Reply with quote

snorty wrote:
Tried the sandpaper method, did the gloves and handlebars, no joy, I might just wait and hope it wears off over time slowly. The layer is so thin so perhaps the alcohol will work.

Glad I didn't get any on my tyres this stuff is slippy as hell.



I doubt alcohol will work, would probably need to be more aggressive. Try something like acetone, that stands a better chance of working.

Acetone is the main ingredient in nail varnish remover, not the modern eco/hand friendly ones, the cheap stuff that says it contains ketones.


I am surprised sanding it didn't work. How old are your grips, could this be a good excuse for some nice new grippy ones?
 Back to top
View user's profile Send private message You must be logged in to rate posts

swiftb
World Chat Champion



Joined: 20 Oct 2008
Karma :

PostPosted: 20:52 - 07 Nov 2011    Post subject: Reply with quote

why and where exactly were you using silicone to 'seal an exhaust' ?? Confused
 Back to top
View user's profile Send private message You must be logged in to rate posts
Quornholio This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

Bezzer
World Chat Champion



Joined: 14 Apr 2005
Karma :

PostPosted: 22:43 - 07 Nov 2011    Post subject: Reply with quote

I can understand using silicone gasket or sealant on an exhaust as it's good for 300C, but it does set to a soft rubbery texture and doesn't stay slippy.
Have you been using old "off" silicone or silicone grease/oil??
____________________
I used to be indecisive but now I'm not quite so sure.
 Back to top
View user's profile Send private message You must be logged in to rate posts

keggyhander
World Chat Champion



Joined: 30 Nov 2008
Karma :

PostPosted: 22:54 - 07 Nov 2011    Post subject: Reply with quote

Bezzer wrote:
I can understand using silicone gasket or sealant on an exhaust as it's good for 300C, but it does set to a soft rubbery texture and doesn't stay slippy.
Have you been using old "off" silicone or silicone grease/oil??


Agree with this. Silicone sealer would peel off. Silicone grease, on the other hand.....

Clean it with acetone.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 109 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.97 - MySQL Queries: 14 - Page Size: 64.63 Kb