CBR 600 exhaust question..

wcr · Borekit Bruiser Joined: 21 Aug 2007 Karma :

I'm trying to source a sport or race end can for a friend with no internet access, theres not many about for his bike tho Thumbs Down

Is there any other years of CBR that would be a direct fit to his??

His is a 1993 CBR600 F-P.

An older one worth about a grand or so, so he doesn't want to spent nearly £200 on a can, I said I'd find him one on eBay but there's very little for that year.

TIA.
____________________
Owner of the CRD Supra (1037bhp)
https://www.youtube.com/watch?v=JHoQbk6y2vo

wcr · Borekit Bruiser Joined: 21 Aug 2007 Karma :

Or is there a CBR 600 forum that I could get the info from?
____________________
Owner of the CRD Supra (1037bhp)
https://www.youtube.com/watch?v=JHoQbk6y2vo

gmanxiii · World Chat Champion Joined: 20 Nov 2006 Karma :

pretty sure you can just measure and get a link pipe from your downpipes and then find an exhaust that fits off that, can strap to hold it and your sorted.
____________________
I kills hondas

VFR400NC30 > ZZR600 > CBR600FX > CBR1000rr

banksy · Nova Slayer Joined: 28 Apr 2007 Karma :

check out fuel exhausts
found it by accident but it was just what i needed for my '98

not sure what model the '93 is but it says they do FH-FL, FM-FW

o yea and the bonus is its dirt cheap but theyre nice looking and decent sonuding exhausts
____________________
banksy
-CG125 07- -GS500F 04- -CBR600 98- -FJ1200 86- -XT350 91- -CBR900RR 01-

wcr · Borekit Bruiser Joined: 21 Aug 2007 Karma :

Would an FX end can and link pipe fit an FP ?

I believe they are both 50mm, it's the angle of the bends on the link pipe I'm concerned about..
____________________
Owner of the CRD Supra (1037bhp)
https://www.youtube.com/watch?v=JHoQbk6y2vo

Bendy · Mrs Sensible Joined: 10 Jun 2002 Karma :

To definitely fit an FP you're looking for anything 1991 - 1994 (FM/FN/FP/FR) as they're all the same bike.

With any others, you might get lucky but they're not the same bike so you may come across problems. If I was trying it, I'd look for FS/FT/FV/FW as that's the next model and is pretty similar in terms of dimensions etc. I think you'd be lucky with FX onwards as a lot of stuff changed.

deanoet · World Chat Champion Joined: 04 Jul 2007 Karma :

https://www.carboncan.co.uk/

give them a ring.

Mate got one off them for an 02 CBR600F, was £100, sounds much nicer than the stock one
____________________
---------------------------------------------------------------------------------------------------------------------------------------------
CBT Passed 18th July 2007 : Previous Bikes> CG125 : Current Bike> Hornet 600 : PASSED DAS 30th Oct 2007
---------------------------------------------------------------------------------------------------------------------------------------------

Bofh5 · World Chat Champion Joined: 25 Oct 2007 Karma :

I have the same bike 1993 FP and bought a scorpion race can from fleabay for 30 quid.

the most important part is the link pipe as stated above.

I asked about everwhere but didn't get any concrete answers.

www.cbrforum.com is pretty useful and has some good how to guides on it.

I've done a bit of work: clutch change, steering head bearings and final drive cleanup and all in all not to bad to work on.

If you want any info on the link pipe i can take some measurements and pics.
Cheers
____________________
(L)users...Disk space is to good for them.

Bikes: Honda 50 / CB125-TDC / 93 CBR600 F2 (Stolen & Trashed) / 2001 SP-1 (Sold) / 95 CBR600 F3