Anyone be able to tell me if i can use ..............

[Bull]

2004 Husqvarna SM570 Triple Clamps in a 2000 610TE Frame I got aset of USD Forks from the SM570 But getting the Clamps for 610 (i think the 610TC should fit as they had USD Forks)
I can only find one set of Clamps for the 610TC But there in the USA

But the Guy i got the Forks from does have the clamps from the SM570

HOPE SOMEONE CAN MAKE SENCE OF THAT LOL

[Vincent]

You will need to get your ruler out Measure the stem on your old bottom yoke and that on your mates bottom yoke. If they're the same, you might get away with a straight swap of the yokes. If they're different, you might still be able to swap just the stem over. If you do have to swap the stem, you'll need either a pretty powerful press or know a machine shop where they can do it. Some have a clip on the bottom or a lip, and some are welded in. They come out from top to bottom.

HTH
____________________
Space Is Deep

[Bull]

I see Will have to see the Farm i do work for on wkend have a Big Prees

I know of 2 old Huskys they have had there forks swopped for the USD ones but as of yet not had a chance to chat to the guy that owns them