Mito Indicators: Fixed.....?

[MitoIslander]

Hiya Guys,

I've sorted the indicators out on my Mito, Thanks for the help.

There is 3 wires going towards the Relay, but only 2 sockets, it turns out that the wrong wire was connected, however, this does now mean i'm confused with what the other wire does! Any one know?

Also, where my bike was dropped when stolen, the screw holes on the indicators don't exist, is there a way I could secure the signal lights on, by clipping the wire behind the body panel so it doesn't move?

Any help on this would be appretiated, and if it doesn't make sence, its because its me!

Jay
____________________
Passed the test, now for the paint....

[Kickstart]

Hi

Suspect the other wire is maybe an earth.

The indicators will just flop around if only secured with the wiring. If there is any of the mounting hole left then try using a large washer to spread the load out.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing