GPZ500s Motad Nexxus kit

[Bomberman]

Both a question and a bit of a Managed to get this new Motad 2-1 on eBay for £230 posted so saving £100 quid ish Still near half what I paid for the bike but still
The question is - looks like everything comes with it barring gaskets - am I right there or are there other parts I'll be missing? Joins/clamps/clips anything like that?
Cheers
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare

[stinkwheel]

Looks like it's pretty much all there. The clamps are part of the exhaust.

I can't remember if the rubber for the mainstand bump-stop is on the stand itself or on the exhaust. If it's missing, as I recall, you can use a rubber door-stop cut in half.

I think your belly pan was missing yeah? If not, remember to space it away from the exhaust or you'll melt a hole in it. A couple of washers under the rear bracket on the exhaust side does the trick.
____________________
“Rule one: Always stick around for one more drink. That's when things happen. That's when you find out everything you want to know.”
I did the 2010 Round Britain Rally on my 350 Bullet. 89 landmarks, 3 months, 9,500 miles.

[Bomberman]

Excellent, thanks for that You do remember right, I am missing the belly pan so don't need to worry about that Can't wait till it arrives!
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare

[Bomberman]

Hmmm. Well it arrived (so good work on the seller there) and appears in new condition. One thing though (and this may be a very stupid question) it has a pretty hefty crease on the inner side near the mid mount point - is it supposed to? I ask as I went up to the bike to turn it over after it's been sat for the week and the one that's on it now has a crease in exactly the same place
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare

[jimspeed]

I will take a look at mine tomorrow as I have the same bike with the same exhaust, dont think I have noticed any creases tho?
happy new year
____________________
Hyosung cruise 125(passed test on, sold) Kawasaki el 252 (better than expected but sold on) Kawasaki GPZ500S first "big"bike.(sold) ZZR600 E5..Z750 2007,ER5, currently on a 2008 Enfield bullet electra x and loving it..
,"Alpha-9: Is there any correlation between dyno rod and dyno kits?"

[Bomberman]

Googling gets this - Divvy 600 version - which has a clear crease just after the downpipes join, much like I have on mine As that's a marketing picture I'm pretty sure it's supposed to be in there.
When you do check tomorrow I'd be surprised if there's nothing now.
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare

[jimspeed]

yea mine has the same thing on it, looks as if the pipe work needed a slight tweak to lline everything up or something
____________________
Hyosung cruise 125(passed test on, sold) Kawasaki el 252 (better than expected but sold on) Kawasaki GPZ500S first "big"bike.(sold) ZZR600 E5..Z750 2007,ER5, currently on a 2008 Enfield bullet electra x and loving it..
,"Alpha-9: Is there any correlation between dyno rod and dyno kits?"

[Bomberman]

Man that's a relief! I thought I may be having a bit of a blond moment, good job I didn't kick off at the seller
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare