Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Sports bike on a flat bed trailer

Reply to topic
Bike Chat Forums Index -> General Bike Chat Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

binge
Emo Kiddy



Joined: 02 Jul 2004
Karma :

PostPosted: 20:44 - 29 Feb 2012    Post subject: Sports bike on a flat bed trailer Reply with quote

Alright guys,

Possibly picking up an R1 on Sunday from Halifax.
It's 250 mile from me.
Will be making a round trip of it to pick up some bike bits in Leicester too.

Now my trailer, it's a flat bed, Steel framed trailer, with a wooden bed on it.
It's had my YZF450, and 2 pit bikes on it, all at the same time. Weighing in at probably more than an R1 anyway.

But I've never secured a sports bike on a trailer, ever.
I've put my MX and SM bikes on them all the time, as I dont give a sh*t if one of them fall over, there is nothing to break.

R1 falling over would write the bike off.


So here's the trailer:

https://a7.sphotos.ak.fbcdn.net/hphotos-ak-snc7/291709_10150284330205606_506045605_7652797_410601_n.jpg


Would you do it? Laughing




Ben
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Frost
World Chat Champion



Joined: 26 May 2004
Karma :

PostPosted: 21:05 - 29 Feb 2012    Post subject: Reply with quote

Have done so. Might be worth checking the wheel base to make sure it'll fit properly though. So long as one of the wheels is strapped down it won't move back and forth or side to side, you just have to make sure it stays upright.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :

PostPosted: 21:10 - 29 Feb 2012    Post subject: Reply with quote

Had my diversion delivered on something flimsier than that... made it more than 40 miles, 100 yards from the house the tyre came off the rim on a corner.

Just check tyre pressures, take your time and keep an eye on the trailer when going along the motorway... and if you are that worried about it, maybe try padding up the sides of the bike first... some old sofa cushions or a couple of single mattresses... OK the trailer will wobble around more since you would be turning it into a 6 foot sail, it won't stop all the damage should the worst happen, but it will reduce it a bit.

OK it's just an idea
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

jimspeed
World Chat Champion



Joined: 05 Mar 2010
Karma :

PostPosted: 22:03 - 29 Feb 2012    Post subject: Reply with quote

I bought one of these
https://www.ebay.co.uk/itm/Mechanics-Workshop-Garage-Motorcycle-Motorbike-Front-Wheel-Chock-Stay-/280811885759?pt=UK_Motorcycle_Parts&hash=item4161b154bf
to bolt on my flat trailer and it is pretty decent for the money even has quick release fittings to put on trailer..
take loads of ratchet straps too and maybe an old blanket to put over the panels so the straps don't mark them..
or go on the train and ride it back Cool
____________________
Hyosung cruise 125(passed test on, sold) Kawasaki el 252 (better than expected but sold on) Kawasaki GPZ500S first "big"bike.(sold) ZZR600 E5..Z750 2007,ER5, currently on a 2008 Enfield bullet electra x and loving it..
,"Alpha-9: Is there any correlation between dyno rod and dyno kits?"
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :

PostPosted: 22:18 - 29 Feb 2012    Post subject: Reply with quote

Yes I would do it but another option is to search for bike trailer hire on the 'net and ebay. The average cost seems to be £25 for one day. Worth it for piece of mind.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :

PostPosted: 22:24 - 29 Feb 2012    Post subject: Reply with quote

Here you go https://www.tridenttrailers.com/trident_trailers_for_hire.htm £33.

or

Simon's Motorcycle Trailer Hire 8, Northridge Rd, Gravesend , Kent , DA12 5AY Tel: 07849 398355

or

https://www.ebay.co.uk/itm/1-Days-Motorcycle-Trailer-Hire-1-2-Bike-Gravesend-Kent-DA12-5AY-/320857123269?pt=LH_DefaultDomain_3&hash=item4ab49329c5

I guess one thing I hadn't considered is that they will probably want a deposit.
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/


Last edited by Ichy on 22:26 - 29 Feb 2012; edited 1 time in total
 Back to top
View user's profile Send private message You must be logged in to rate posts

stonesie
World Chat Champion



Joined: 04 Jul 2010
Karma :

PostPosted: 22:24 - 29 Feb 2012    Post subject: Reply with quote

Marki wrote:
Yes I would do it but another option is to search for bike trailer hire on the 'net and ebay. The average cost seems to be £25 for one day. Worth it for piece of mind.


As above, for a bike you actually care about a proper trailer that will keep it upright and secure is worth the hire fee Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :

PostPosted: 22:25 - 29 Feb 2012    Post subject: Reply with quote

I hired a trailer to collect a people carrier and that was only £35 for the day (£300 deposit though).

If you are confident enough in the trailer then there shouldn't be too much of a problem... not sure about a fiesta towing it though LOL
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

binge
Emo Kiddy



Joined: 02 Jul 2004
Karma :

PostPosted: 22:37 - 29 Feb 2012    Post subject: Reply with quote

It has to be this trailer due to the towing car.
I've not got the Fezzer any more, I've got my Mk1 Clio, which has been lowered 40mm.
I've also lowered the trailer since the picture, so it sits level when hitched up to the clio.
Cant tow a regular trailer with the clio as it sits at a right pissed angle! Laughing


I'm very confident in the trailer, Just never had experience in strapping down a sports.
Are they more likely to skip out from under the straps than an MX bike?
With the MX bikes, there were loads of strapping points on the bike.
On a sports, it seems there are very few. Sad


New setup:

https://a8.sphotos.ak.fbcdn.net/hphotos-ak-snc7/s720x720/418047_10150580292430606_506045605_8945781_1709703325_n.jpg


And for the record, the Clio will tow just about anything. Laughing
It also out-drags most cars WITH the trailer fitted.
Smashed a VRs Skoda the other day with the Pit bike on the trailer.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

UKRedwing
Trackday Trickster



Joined: 15 Apr 2009
Karma :

PostPosted: 23:17 - 29 Feb 2012    Post subject: Reply with quote

binge wrote:
It also out-drags most cars WITH the trailer fitted.
Smashed a VRs Skoda the other day with the Pit bike on the trailer.


Pfft what a load of bollox Laughing ,
Obviously didn't know how to drive or just wasn't racing.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pie-Roe
World Chat Champion



Joined: 05 Feb 2007
Karma :

PostPosted: 23:21 - 29 Feb 2012    Post subject: Reply with quote

I moved my old x11 (240kg and a chunk wider than an r1) on a single small bike trailer about 40 miles.

I bound the front brake, put a towel on the seat and did two crossed over ties over it, one each side of the headstock compressing the forks, and a couple through the rear wheel.

as long as you rachet/tighten it down so the suspension can't move it should be fine.
____________________
Previous: GSF600, FZR600 x2, ZXR750, XT600 Tenere, CB125, CZ125, ETZ 250, ER5, CCM R30, DRZ400, RF600x4, RF900x2, GS500, VTR1000F, 640 SMC, CB250 NIGHTHAWK, GT550x3, GPX750 TE610, CB500, X11x2, SV650, ZING 125, TL1000R,CB250 Superdream, CBR1100XX
 Back to top
View user's profile Send private message You must be logged in to rate posts

binge
Emo Kiddy



Joined: 02 Jul 2004
Karma :

PostPosted: 23:38 - 29 Feb 2012    Post subject: Reply with quote

UKRedwing wrote:

Pfft what a load of bollox Laughing ,
Obviously didn't know how to drive or just wasn't racing.


Luke has spent thousands on his, and the Clio can keep up (obvs without the trailer).
With the trailer, it keeps up with a stock VRs Fab easily.

It's not actually a 1.2 clio by the way





Pyro, I've always been worried about pulling the suspension down as far as that for fear of popping seals.





Ben
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :

PostPosted: 00:02 - 01 Mar 2012    Post subject: Reply with quote

The thing that springs to mind at the moment is would you be overloading the rear end of the car? You might feel it safe and sturdy, but if you were stopped by the police for an unbalanced load or something (even though bikes are quite light, is it exceeding your axle weight?)..

Personally I've had an intruder 125 tied up in the back of an espace with a lump of washing line, as for straps, if it comes to it go and buy a very long length of blue rope and tie it around as much of the bike and trailer as you can. If it looks very secure then chances are it will be secure enough as long as you ain't going along a NSL dirt track filled with pot holes, dips and adverse cambers etc.

Trailer and car look stable enough (I'd drive 'em), just make sure if the whole lot goes over, the bike will be stuck solid to the trailer and pad the top of the bike.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

grant965
Brolly Dolly



Joined: 02 Mar 2011
Karma :

PostPosted: 09:39 - 01 Mar 2012    Post subject: Reply with quote

possibly add a new bar to the trailer which will come from the base upwards which you can tie the bike to and will stop it going over?
i.e. a pole near the rear that you can clamp/tie onto the swing arm?
If you have any old tyres put them at the side, I always use old tyres if there is risk of the bike going over as they absorb most of the impact.
Grant
____________________
Ex bikes: 05 Suzuki En 125, '98 Yamaha Thundercat, '08 Honda cbr125, '05 Kawasaki z750, '03 Triumph Daytona 600, '91 Kawasaki ex250, '03 Hyosung Comet 125
Current Bike: '02 Suzuki TL1000R
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

P.addy
Formerly known as
P.



Joined: 14 Feb 2008
Karma :

PostPosted: 10:52 - 01 Mar 2012    Post subject: Reply with quote

Ben,

Compressing the forks won't be that bad. When G picked up his GSXR thou, he put in his van and put straps over the front end wedging it down hard.

Put the front brake on solid, ain the wheel to the left and put on side stand possibly on a bit of metal thats spread out alot (I used a piece of wood really...) just thinking of the stand + straps forcing the stand into the wood is all.

Strap down over the front end then one from the left side of the trailer through the front foot peg and back on to the left hand side, same with the right hand side.

For peace of mind, one straight over the seat with a pillow or two so the straps dont rub on seat or plastics Thumbs Up I did a 125 with 2 straps on a far more flimsy trailer for 20 miles then through detling Laughing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 11:04 - 01 Mar 2012    Post subject: Reply with quote

Hi

Bit that would concern me is that with that trailer you have nothing to stop the wheels sliding sideways, and as soon as that happens the bike will be a bit lower to the bed of the trailer and the straps to the top of the bike effectively far looser.

If you could knock up some kind of secure U shaped channel for the front wheel to sit in that would fix that issue. Or you could try strapping the wheel with a strap to each side of the trailer from the bottom of the wheel.

R&G make some bar straps. These slide over the grips and provide something to attach normal straps to. Worth getting some of these if you can. They are here.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 11:12 - 01 Mar 2012    Post subject: Reply with quote

Have you got or can you borrow an ABBA stand?
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bomberman
World Chat Champion



Joined: 17 Aug 2004
Karma :

PostPosted: 11:27 - 01 Mar 2012    Post subject: Reply with quote

Kickstart wrote:

If you could knock up some kind of secure U shaped channel for the front wheel to sit in that would fix that issue. Or you could try strapping the wheel with a strap to each side of the trailer from the bottom of the wheel.

Isn't that a wooden bed on the trailer? Could he not just bolt in two 2x4's alongside each wheel?
____________________
'Allo! My name is Inigo Montoya, you killed my father, prepare to die!
'89 TZR 125 - '94 GPZ500s - ZK3 GSXR600 Alstare Very Happy
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 11:33 - 01 Mar 2012    Post subject: Reply with quote

Bomberman wrote:

Isn't that a wooden bed on the trailer? Could he not just bolt in two 2x4's alongside each wheel?


You could well be right. I had assumed it was a sheet steel floor with light surface rust, but checking I am far from certain.

If it is wood then knocking up such a channel is 5 minutes work.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RIDINGforKICK...
Scooby Slapper



Joined: 06 Oct 2011
Karma :

PostPosted: 12:08 - 01 Mar 2012    Post subject: Reply with quote

Don't underestimate how difficult it is to secure a load, especially something as awkwardly shaped as a sports bike.

If it does come lose, everything will unravel very rapidly indeed.

Been there.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

robbieguy2003
World Chat Champion



Joined: 30 Mar 2007
Karma :

PostPosted: 12:22 - 01 Mar 2012    Post subject: Reply with quote

I'd do it, a friend has moved my RR7 quite a few times on something that's not quite as good as your one.

I'd get x4 blocks of cheap wood and get them stuck down so you can get the front/rear wheels between them. Cable tie the front brake lever in so it's tight and not moving, then ratchet strap the thing down. A few straps over the seat, headstock, rear wheel/swingarm should keep it nice and secure. And with wooden blocks keeping the wheels from moving sideways, nothing should come loose.

When you pick it up, drive maybe a mile and then stop and check everything.
____________________
Current Bikes: Honda CBR 600RR - '07, Suzuki GSX1250 FA ST '11
Old Bikes: Suzuki Intruder 125 LC - '2001, Honda CBR 600F - '92, Honda CBR 600RR - '03
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

RIDINGforKICK...
Scooby Slapper



Joined: 06 Oct 2011
Karma :

PostPosted: 12:35 - 01 Mar 2012    Post subject: Reply with quote

I'd secure it top and bottom, as Kickstart alludes, taking into account the fore and aft forces as well as the side ways forces, as safely as I possibly could, and then secure a tarp over the lot, and fasten that down tightly.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 12:43 - 01 Mar 2012    Post subject: Reply with quote

If no front wheel holdererer. Try to get the attachment as high up on the bike as possible.
You will have to grab the bike by the handle-bars and attach to the outer edges of the trailer some how.
You can simply wrap the tied-down straps around a clear section of the bars and hoi it down.
Do the same at the rear. The pillion rests are best place and should be up high enough.

Be careful around bodywork lights etc.

You will probably need someone to help hold the beast whilst you tie it up.
Make sure you compress the suspension at least enough that your weight on the seat doesn't make it go down.

Make sure any straps are protected where they cross or wrap around rough/sharp edges.
On a haul the bike moves/jiggles about and after a while can cut/fret through the nylon webbing.

Tie it down and then stop after about 3-5 miles and check/re-do the tension.

Speed limits are: Single carriageway 'A' roads 50mph Dual carraigeways and Mways 60mph.
Cannot use the third lane on Mways and remember you have a trailer hooked up. Embarassed
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :

PostPosted: 12:46 - 01 Mar 2012    Post subject: Reply with quote

robbieguy2003 wrote:
A few straps over the seat, headstock, rear wheel/swingarm should keep it nice and secure.


From experience, straps just going over the bike are not that useful. They compress the suspension a bit but provide very little side to side location, pretty much just limited to the friction between the strap and the seat. Once it starts to move sideways, depending on the exact positions of the straps, the length of the route the strap takes can get longer which means it isn't as tight.

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

P.addy
Formerly known as
P.



Joined: 14 Feb 2008
Karma :

PostPosted: 13:07 - 01 Mar 2012    Post subject: Reply with quote

Also, gis a go Thumbs Up
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 7 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.13 Sec - Server Load: 0.47 - MySQL Queries: 14 - Page Size: 134.78 Kb