De-restricting an import nsr 125 exhaust

[Shimmydude]

I was reading another forum and I read that it is harder to de-restrict the exhaust on an import machine. I was thinking of doing mine and would just like to ask is it harder and if so what is the step by step method of doing it?
____________________

[Keith]

shouldnt be any different.
just get the pipe off and yank the restriction out
____________________
Aprilia RSV Mille R Edwards Replica - Aprilia RS250 - Suzuki GSXR600 Supersport Race Bike

[Shimmydude]

Indeed i will!
____________________

[Irdawood the 2nd]

Ok mate if its an import it will be slightly differant to that on nsr125.com. Take the exhaust off, and I think if its the UK one you will be able to see this.
If its an import its a lot more difficult, where the exhaust come out from the bike there are kinks in the pipe work at the first kink you need to cut there and there will be a ring, grind the ring away and then weld back up. You may need to take it to a garage to do it. But before you do this find out what restriction there is on it. Then try and find the guide on the net with pictures on how to do it properly.

Hope that helped mate

[Shimmydude]

Thanks mate, ill take it off and have a look. Hopefully it should be easy enough!
____________________