Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


It's taken me this long to realise..

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :
PostPosted: 21:13 - 02 Jun 2012    Post subject: It's taken me this long to realise.. Reply with quote
For various reasons I've never tried to fit the petrol tank properly on my bike... I got a pair of tank rubbers and tried putting everything in place but couldn't get it to fit properly (snapped my repaired radiator mount, took a chunk out of the body filler I used to repair a deep dent, was crushing a water pipe etc).

The only thing that springs to mind is it's a petrol tank from an air cooled GPz.

Now I don't know if I should just repair this tank and sell it on and try to buy a 900 tank instead.

Ever so slightly cheesed off becase the tank has been the one part that (believe it or not), has had the most work done to it (rust removal, kreem lined, dents repaired (with crushed acorns apparently), primed and painted, stripped, refilled dents properly, rewired fuel guage sender, tap stripped and cleaned etc etc).

Ever so slightly cheesed off now Evil or Very Mad
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

yen_powell
World Chat Champion



Joined: 22 Jun 2008
Karma :
PostPosted: 21:52 - 02 Jun 2012    Post subject: Reply with quote
Air cooled GPz tank had a pod attached with LCD readout. The watercooled GPZ ones didn't. See pic for air cooled tank.
https://upload.wikimedia.org/wikipedia/commons/e/ea/Kawasaki_GPz750.jpg
Water cooled tank.
https://motoprofi.com/bikephoto/1294/kawasaki_gpz_750_r_1985_1.jpg
____________________
Blackmail is a nasty word........but not as nasty as phlegm!
XT1200Z and a DR350 in bits
 Back to top
View user's profile Send private message You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :
PostPosted: 22:13 - 02 Jun 2012    Post subject: Reply with quote
OK I'm slightly confused now, I'm sure if there was ever an LCD readout on the petrol tank there would have been some kind of indicator of it being there (where it screwed down or whatever) which there isn't.

On the air cooled picture it looks like there are 4 screws holding the side panel on, but there isn't any markings on the tank to suggest that either, they seem to clip in like the water cooled picture.

The petrol cap is definitely the one from the water cooled tank as I bought the air cooled one by mistake and it will not fit... so why is the water pipe being crushed, I've already checked and it wouldn't fit round the frame any other way and still reach the radiator Confused

Back to the manual I think
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Nexus Icon
World Chat Champion



Joined: 26 Aug 2010
Karma :
PostPosted: 22:15 - 02 Jun 2012    Post subject: Reply with quote
Pine cones not acorns Thumbs Up
____________________
Greetings from Shitsville!
 Back to top
View user's profile Send private message You must be logged in to rate posts

yen_powell
World Chat Champion



Joined: 22 Jun 2008
Karma :
PostPosted: 22:37 - 02 Jun 2012    Post subject: Reply with quote
andym wrote:

On the air cooled picture it looks like there are 4 screws holding the side panel on, but there isn't any markings on the tank to suggest that either, they seem to clip in like the water cooled picture.

Air cooled side panels are held on with a plastic lug and two large screws. The things by the tank aren't fixings, just decoration.

Have you got the right rubber bungs on the frame?
____________________
Blackmail is a nasty word........but not as nasty as phlegm!
XT1200Z and a DR350 in bits
 Back to top
View user's profile Send private message You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :
PostPosted: 23:13 - 02 Jun 2012    Post subject: Reply with quote
Nexus Icon wrote:
Pine cones not acorns Thumbs Up


I stand corrected Embarassed

Everything seems to match up with the 900 yen and the bungs were for a 900, they fit the frame and the tank, I've checked the manual and the water pipes are routed correctly. I don't know if I have any pictures that show the problem, if not then I'll take some tomorrow (if it stops raining that is)
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 77 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.11 Sec - Server Load: 0.42 - MySQL Queries: 14 - Page Size: 49.22 Kb