Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


what do you lot use (if anything) for shifting the bike?

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

mikester
Trackday Trickster



Joined: 04 Mar 2012
Karma :

PostPosted: 19:26 - 13 Jun 2012    Post subject: what do you lot use (if anything) for shifting the bike? Reply with quote

in terms of in the garage say when you're working on it or moving it to fit the car in etc?

i'm looking at buying a stand that will be able to move the bike around parralel to the back wall so i can get in tight with the car and push bikes. at the moment i'm just tugging at the pillion arms and moving it with what little upper body strength i have but can't get it that last half meter into the wall (as i'm standing in the way proppeing the side stand to stop a drop).

I looked into envy stands but they're too pricey for me. i've seen this on ebay and it is the closest thing thus far to match what i think suits my needs:

https://www.ebay.co.uk/itm/BIKE-BUDGER-MOVABLE-MOTORBIKE-MOTORCYCLE-REAR-PADDOCK-STAND-WITH-FORK-FITTINGS-/280775193081?pt=UK_Motorcycle_Parts&hash=item415f8171f9#ht_2167wt_1396
280775193081

i know its just a rear paddock stand with dolly wheels on but the vid seems to show super easy movement. my only concern is the leverage offered when propped up looks tiny, ie the stand would flip back up at any moment.

what else could i use in the garage to move the bike?


opinions/comments on my manliness (or lack of) welcome Smile
 Back to top
View user's profile Send private message You must be logged in to rate posts

andym
World Chat Champion



Joined: 16 Nov 2010
Karma :

PostPosted: 19:52 - 13 Jun 2012    Post subject: Reply with quote

cut down and bodge an old shopping trolley, I was going to pinch one of the flat bed ones from homebase, but was too tight to pay the £1 for it
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :

PostPosted: 19:53 - 13 Jun 2012    Post subject: Reply with quote

I wouldn't use one of those things on anything less than a glass-smooth floor. If it catches on even the smallest stone/nut/bolt/rut in the floor you run the risk of it lifting the bobbin out of the hook, and when it comes back down it's likely to miss and dump the bike and stand on the floor.

I have a much better device called moto mover or something which is like a wheel chock on casters, you can't pull the wheel out of it no matter how hard you try.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

mikester
Trackday Trickster



Joined: 04 Mar 2012
Karma :

PostPosted: 20:03 - 13 Jun 2012    Post subject: Reply with quote

Pete. wrote:
I wouldn't use one of those things on anything less than a glass-smooth floor. If it catches on even the smallest stone/nut/bolt/rut in the floor you run the risk of it lifting the bobbin out of the hook, and when it comes back down it's likely to miss and dump the bike and stand on the floor.

I have a much better device called moto mover or something which is like a wheel chock on casters, you can't pull the wheel out of it no matter how hard you try.


where'd you get that from? how you get it onto the caster in the first place, roll/ride on?

I'd prefer this option tbf
 Back to top
View user's profile Send private message You must be logged in to rate posts

mikester
Trackday Trickster



Joined: 04 Mar 2012
Karma :

PostPosted: 20:04 - 13 Jun 2012    Post subject: Reply with quote

andym wrote:
cut down and bodge an old shopping trolley, I was going to pinch one of the flat bed ones from homebase, but was too tight to pay the £1 for it


i was toying with the idea of making one, didn't want to bodge with safety though
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 21:56 - 13 Jun 2012    Post subject: Reply with quote

Spin it on the side stand. Carefully, Now.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

mikester
Trackday Trickster



Joined: 04 Mar 2012
Karma :

PostPosted: 18:35 - 14 Jun 2012    Post subject: Reply with quote

Rogerborg wrote:
Spin it on the side stand. Carefully, Now.


Ahh I must try that!

Thanks, never thought of that
 Back to top
View user's profile Send private message You must be logged in to rate posts

G
The Voice of Reason



Joined: 02 Feb 2002
Karma :

PostPosted: 19:31 - 14 Jun 2012    Post subject: Reply with quote

My legs/arms in combination with wheels?

If I want to shift it over in a confined space, lean the rear of the bike against my upper leg and lift (so that most of the force is taken by my leg rather than back).
 Back to top
View user's profile Send private message You must be logged in to rate posts

map
Mr Calendar



Joined: 14 Jun 2004
Karma :

PostPosted: 20:51 - 14 Jun 2012    Post subject: Reply with quote

When my bike was stored one winter at my parents garage we got one of these for the centre stand so the bike could be put parallel to the rear wall.

https://www.becker-technik.de/Rangier-As_fur_Haupt_und_Seite/Rangier-As_fur_Haupt_und_Seite/Rangier-AsE52.JPG
click on image for link

Hein Gericke stock this - click here.

Not cheap but did the job. As can be seen they do offer a rear wheel or front wheel with side stand variant.
____________________
...and the whirlwind is in the thorn trees, it's hard for thee to kick against the pricks...
Gibbs, what did Duckie look like when he was younger? Very Happy
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Walloper
Super Spammer



Joined: 24 Feb 2005
Karma :

PostPosted: 05:21 - 15 Jun 2012    Post subject: Reply with quote

Rogerborg wrote:
Spin it on the side stand. Carefully, Now.


That will overload the pin and stress the frame.
It is not designed to carry the weight of the bike.

The above is a True Story.

The one out of HG is quite robust and simple to use. Needs a flat floor but. It is a cnut to use on rough concretes.

Fcuk.... But it needs a center stand though.
____________________
W-ireless A-rtificial L-ifeform L-imited to O-bservation P-eacekeeping and E-fficient R-epair
 Back to top
View user's profile Send private message You must be logged in to rate posts

Ichy
World Chat Champion



Joined: 15 Jul 2005
Karma :

PostPosted: 07:57 - 15 Jun 2012    Post subject: Reply with quote

I was fairly happy with one of these when I had one.

https://www.ebay.co.uk/itm/CLARKE-motorcycle-dolly-MCD1-bike-mover-showroom-garage-/330737242622?pt=UK_Motorcycle_Parts&hash=item4d0179d1fe

https://media03-ak.vivastreet.com/classifieds/d4/4/48274330/large/1.jpg?dt=ed64db9a6277024f3bf059ee07121885
____________________
https://www.metacafe.com/watch/1972097/how_to_behave_on_a_forum/
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 14 years, 25 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 1.48 - MySQL Queries: 17 - Page Size: 75.34 Kb