RS50 engine into RX50?

[-bandit]

I need a new engine for my Aprilia RX50. The RX50 and RS50 both have am6 engines, so would the RS version go into my RX frame?

They only problem I can think of is the kick starter, because the RX engine is kick start and the RS is electric....but I don't know how to get around this?! Other than this would there be any other problems?

Also are any of these any good?

https://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=200787068480&ssPageName=ADME:X:RTQ:GB:1123#ht_500wt_1416

https://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=261054619019&ssPageName=ADME:X:RTQ:GB:1123#ht_500wt_1185

Cheers!

[MaybeGuy]

Use the kickstart mech and clutch casing from your RX engine. Chances are, all the cutouts are in the RS engine.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[-bandit]

Cool so if I change the cover the kick start part should just fit in with the casing I already have?

Thanks.

[MaybeGuy]

SHOULD...
I know it works on DT engines when you want to add a kick start to the electric only ones.
____________________
Blue_SV650S wrote: it was a sh1te wheelie, but it proves that he can get it up in 3rd and can do angles. In summery, mattsprattuk is a gobby little sh1tebag, dopehead tw4t, but sadly for all of us, he probably isn't THAT full of sh1te!!
Kickstart wrote: Hi I tend to agree with Matt. All the best Keith

[-bandit]

Ok I'll try and find out for certain.

Thanks for the help.