Trying to remove zxr 750 engine but having probs

[royzxr750]

Hi guys im trying to remove the engine from my zxr 750 project but im having trouble getting the last pin/long bolt out from the top of the rear of the engine. Can anyone help why it will not move.The bolt will spin round on a breaker bar with alot of force.

[_Iain_]

All the weight of the engines suspended on it i would have thought. Jack the engine up a few MM and tap the centre of the bolt with a punch/hammer combo.
____________________
Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340

[royzxr750]

I tryed that as i put a car jack under the engine before i even started to undo any of the bolts. So its iver theres weight still on that pin or its seized in there?

[_Iain_]

most likely a bit of both. Just hit it with a hammer
____________________
Please be aware that the above post may be full of complete nonsense.
Riding: '07 KTM Duke II, Baotian BT49QT-20 Driving: '88 Volvo 340

[royzxr750]

thats what iv been doing lol. Will be trying it again hopfukky tomorrow