suzuki gs125 high rev electrical indicator problem.

[lwincott07]

Hi all, this is my first post so please bear with me

Right, my indicators stop working at high revs, they work fine at idle or even low revs whilst riding, but as i hit higher revs they stop working, im assuming for some reason the viberations are preventing the flow of electricity. Earth?

Any help & knowledge would be appriciated.

Thanks.

[unitynotsocri...]

you could check all the indicator wiring and check the base of the bulbs ,and bulb holders for corrosion through water damage.Also check the flasher unit making sure its rubber mount is ok.
____________________
nearly a normal tax paying tosser.......with ferrileness suzi100,cg125,cb125scb100n,cb175,cd100,cj250t,kh250,c15,125 bantam,super 6,rickman gs750,xt500,250rs,dt175,lifan125,dolomite1850,metro,Morris220ld,morrisfg,leyland princess,range rover,corsa,vw camper .now struggling with legs. MORE ORDER = MORE CHAOS

[GREENI3]

Could be a faulty earth.

The old indi's I had on the cb would flash at different rates or sometimes not at all, dependent on revs.
Turns out the indicator had been bodged badly by the previous owner and the wiring was partially stripped, making unwanted contact with the frame.

Changed them back to stock indicators and this resolved it.