New exhaust - bike shakes

[Jammy-G]

Hello,

Since I've had a new exhaust on my RXS100 it feels a lot different. it is just a replacement standard exhaust and when in low revs it sounds perfect, soft and quiet. Yet when i accelerate at about 5-6k it starts the vibrate a lot and shake and sound pretty rough.

It only started once the new exhaust has bene put on (it is tight), and since the mirrors were put on at the same time. Although i'm pretty sure its not that

Any help would be appreciated, arms beginning to ache !
____________________
RooRoo: just like the time i stuck my finger up my arse with no lube at all and she didnt talk to me for hours

[coolfox1]

Had the same thing with mine, there is a post someware, same thing with at them revs, bolts where tight but gasket and clamp ring needed sorting, will see if I can find the post

Ian

[coolfox1]

https://www.bikechatforums.com/viewtopic.php?t=26043&highlight=

[mr jamez]

Check that their is a gasket, check all the bolts are tight and you may also need rubber grommets where the exhaust mounts onto the frame.

[Jammy-G]

It is just the new muffler/silencer and the assy pipe from the engine hasn't been removed. Where the silencer meets the assy pipe its connected with a 'flange' mounting (I think thats what my manual said), so it is just shoved in and bolted up to keep in place.

I coated all the connecting peices in exhaust fire putty and this has stopped it blowing but as its exactly the same exhaust as the last (just in better condition) I'm not sure how it can make a difference.

I'll try a rubber washer where it mounts onto the frame.

Thanks for your help.

James.
____________________
RooRoo: just like the time i stuck my finger up my arse with no lube at all and she didnt talk to me for hours