Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


What is the best way to ride re engine life?

Reply to topic
Bike Chat Forums Index -> General Bike Chat Goto page 1, 2  Next
View previous topic : View next topic  
Author Message

Mondeo Man
Trackday Trickster



Joined: 21 May 2011
Karma :

PostPosted: 12:06 - 22 Dec 2012    Post subject: What is the best way to ride re engine life? Reply with quote

I've always been a slow rider, happy to pootle at 20 in 4th, say. I.e low revs range.

In the past, I preferred to shift early to get up to speed, rather than race the engine to red line in each gear. This is how I drive my car as well - I rarely top 3000rpm and usually in top gear by 30mph.

My thinking has been, the slower the revs, the less mania for the engine, the less stress and load, etc, the kinder to the bike. Kinda like walking to a destination rather than running: you'll arrive with less risk of injury along the way.

I'm not talking about going so low in the revs that the engine struggles. I mean, keeping the throttle responsive, but never really pushing to the high revs. So the bike sticks around the 3-5 rpm for cruising rather than 10-12.

However, I have been pining it in first, on my bandit 6s, lately, just for fun, but I'm paranoid that this can't be good for the engine. Am I right? Wrong?
 Back to top
View user's profile Send private message You must be logged in to rate posts

KDub
Renault 5 Driver



Joined: 04 Sep 2010
Karma :

PostPosted: 12:10 - 22 Dec 2012    Post subject: Reply with quote

A Bandit 600? I don't think they have enough power to cause any damage to anything.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Mondeo Man
Trackday Trickster



Joined: 21 May 2011
Karma :

PostPosted: 12:16 - 22 Dec 2012    Post subject: Reply with quote

KDub wrote:
A Bandit 600? I don't think they have enough power to cause any damage to anything.


Really, so I could hit the limiter for 24 hours straight and it wouldn't harm the bike?

Piss off if you've nothing meaningful to contribute.
 Back to top
View user's profile Send private message You must be logged in to rate posts

nowhere.elysium
The Pork Lord



Joined: 02 Mar 2009
Karma :

PostPosted: 12:17 - 22 Dec 2012    Post subject: Reply with quote

24 hours straight is a meaningless exaggeration, but the point of the limiter is specifically to inhibit engine damage, so yes.

Also, so much irony:
Mondeo Man wrote:
Piss off if you've nothing meaningful to contribute.

____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project
 Back to top
View user's profile Send private message You must be logged in to rate posts

CaNsA
Super Spammer



Joined: 02 Jan 2008
Karma :

PostPosted: 12:23 - 22 Dec 2012    Post subject: Reply with quote

Best way to ride it?

Like you stole it!

/thread
 Back to top
View user's profile Send private message You must be logged in to rate posts

krarkol
World Chat Champion



Joined: 17 Oct 2012
Karma :

PostPosted: 12:25 - 22 Dec 2012    Post subject: Reply with quote

Tbh it should be fine for many many miles if you do open it up a lot, aslong as you shift before it goes into the red.

If your bandits 2nd hand then chances are it's already been thrashed and you'll probably have got rid of the bike before the thrashing has done anything bad to the engine anyway Laughing
____________________
Bandit 600 - deaded
 Back to top
View user's profile Send private message You must be logged in to rate posts

J.M.
World Chat Champion



Joined: 27 Mar 2011
Karma :

PostPosted: 12:38 - 22 Dec 2012    Post subject: Reply with quote

Mondeo Man wrote:
Really, so I could hit the limiter for 24 hours straight and it wouldn't harm the bike?


Don't be silly, you'd run out of petrol.
____________________
2004 R1 & 2018 XSR900
 Back to top
View user's profile Send private message You must be logged in to rate posts

0l0dom0l0
World Chat Champion



Joined: 21 Oct 2009
Karma :

PostPosted: 12:53 - 22 Dec 2012    Post subject: Reply with quote

I cruise at 4-6k revs generally.

When accelerating hard I use all the revs in every gear, exactly as the bike was designed to be ridden.

You won't cause any damage to anything, unless the engine is cold in which case you will.
____________________
CBT Passed: 30/08/2009, Theory Passed: 31/08/2010, Mod 1 Passed: 6/9/2010, Mod 2 Passed: 13/09/2010. Restriction ended 13/09/2012.

Bikes: 2007 Derbi GPR 50, 1998 Yamaha Fazer 600 (written off), 2002 Yamaha Fazer 600, 1994 CBR 600F, 2003 Triumph Daytona 600, Kawasaki ZX6R J1.....Current: 2006 Yamaha FZ6, 1998 Suzuki TL1000R and a Honda VFR 400 NC30.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Al
World Chat Champion



Joined: 26 Feb 2006
Karma :

PostPosted: 13:03 - 22 Dec 2012    Post subject: Reply with quote

On most modern bikes the engine will outlast the rest of the bike in normal use anyway, you'll just use a bit more fuel and wear out some other parts like the clutch and tyre faster.
____________________
Yamaha FZR400RR 3tj
My Instagram Thingy
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

kernow24
Crazy Courier



Joined: 15 Jun 2011
Karma :

PostPosted: 13:03 - 22 Dec 2012    Post subject: Reply with quote

Like you would ride a woman, hard and fast till it breaksdown, then repeatedly hit it with a hammer till it works again.
____________________
.........................................................................
 Back to top
View user's profile Send private message You must be logged in to rate posts
Blau Zedong This post is not being displayed because the poster is banned. Unhide this post / all posts.

T0MMY
World Chat Champion



Joined: 08 Jun 2008
Karma :

PostPosted: 13:22 - 22 Dec 2012    Post subject: Reply with quote

I would say in response to this thread, just live a little for god's sake.

If you enjoy opening the old girl up are you really going to not do so on the basis that your average daily running cost will go up by a few pence Rolling Eyes
____________________
ZX6R + CBR600RR
 Back to top
View user's profile Send private message You must be logged in to rate posts

Benson_JV
World Chat Champion



Joined: 04 May 2010
Karma :

PostPosted: 13:31 - 22 Dec 2012    Post subject: Reply with quote

Dunno about you but on my B6 when I'm cruising on the motorway it's always about 9krpm so not exactly low. I always blast it about everywhere changing quite late, nothing wrong with it.
____________________
Willson - "If you go out on that CBR600 in the winter, you're going to do more miles on your side than on your wheels."
Riding: CBR600FW Driving: Audi A6
Previous Bikes: '96 Bandit 600, '96 GPz305
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

trevor saxe-coburg-gotha
World Chat Champion



Joined: 22 Nov 2012
Karma :

PostPosted: 13:40 - 22 Dec 2012    Post subject: Reply with quote

kernow24 wrote:
Like you would ride a woman, hard and fast till it breaksdown, then repeatedly hit it with a hammer till it works again.


And if it breaks in several pieces, chuck it in the boot of the car, take it around to your mates and both poke and prod at it until its fluids run over the floor. Next step is to it throw it out into the yard and leave it to rot. Always works for me anyway.
____________________
"Life is a sexually transmitted disease and the mortality rate is one hundred percent."

Mobylette Type 50 ---> Raleigh Grifter ---> Neval Minsk 125
 Back to top
View user's profile Send private message You must be logged in to rate posts

drzsta
World Chat Champion



Joined: 20 Apr 2009
Karma :

PostPosted: 14:03 - 22 Dec 2012    Post subject: Re: What is the best way to ride re engine life? Reply with quote

Mondeo Man wrote:


However, I have been pining it in first, on my bandit 6s, lately, just for fun, but I'm paranoid that this can't be good for the engine. Am I right? Wrong?



So did you buy the bandit new?No. That thing has been ragged to shit mate. Whatever you can throw at it, it's been there before.

I always thought you were just a troll, now I realise the sad truth that you really are that fucking pathetic and stupid.

Please die.
____________________
Current Bikes - BMW S1000RR ‘17 & KTM 690 SMC-R ‘12
 Back to top
View user's profile Send private message You must be logged in to rate posts

AlexW
Spanner Monkey



Joined: 11 Sep 2011
Karma :

PostPosted: 14:09 - 22 Dec 2012    Post subject: Reply with quote

Going around slow as hell all the time won't be helping it either, Moreso on certain cars, a good thrashing helps a huge amount.

I flip between the two, a good trash will help clear carbon buildup in various places of the engine etc.
 Back to top
View user's profile Send private message You must be logged in to rate posts

reed
Nearly there...



Joined: 28 Oct 2012
Karma :

PostPosted: 18:12 - 22 Dec 2012    Post subject: Reply with quote

I dont see how anyone can go from A-B without thrashing it a little Smile I always find somewhere to pin the throttle Smile live without worrying about every penny, much more fun
____________________
Generic XOR 50, Gilera SMT 50, GSXR 400 GK73A, Ducati Monster 600, Honda Hornet 600.
Sold. Stolen. Written off. Sold. Current.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

i.p.phrealy
World Chat Champion



Joined: 07 Oct 2012
Karma :

PostPosted: 18:23 - 22 Dec 2012    Post subject: Reply with quote

Sort of related but I knew someone who had to do a complete carb rebuild on an XR2 because the old dear who had it previously never revved it hard enough to open the 2nd butterfly in the carb.
the engine is designed to work throughout it's rev range, so pinning it won't harm it. Thumbs Up
____________________
it is impossible to lick your own elbow...
and if you just tried you need professional help.
Finally allowed a big bike 19/03/14!
 Back to top
View user's profile Send private message Send e-mail Visit poster's website You must be logged in to rate posts

Slacker24seve...
World Chat Champion



Joined: 10 May 2010
Karma :

PostPosted: 18:30 - 22 Dec 2012    Post subject: Reply with quote

Live a little.
____________________
Triumph Daytona 675 track bike + girlfriend's Honda Hornet 600
Selling a hack/winter bike for less than a grand? PM me.
Banger rallies are ace
 Back to top
View user's profile Send private message You must be logged in to rate posts

krarkol
World Chat Champion



Joined: 17 Oct 2012
Karma :

PostPosted: 18:31 - 22 Dec 2012    Post subject: Reply with quote

If it wasn't good for it then the redline would be at something like 6k. It's pretty much a detuned 90's sport bike engine. It's designed for it's power to be delivered at the high end of the rev range, whence why it really picks up in every gear at around 7k
____________________
Bandit 600 - deaded
 Back to top
View user's profile Send private message You must be logged in to rate posts

Paulington
World Chat Champion



Joined: 11 Mar 2009
Karma :

PostPosted: 19:03 - 22 Dec 2012    Post subject: Reply with quote

In my IAM training I was told many times specifically not to ride/drive around in top gear at 30mph, one, it can put excess strain on drivetrain components and two, if you have to make an emergency stop you lose a lot of engine braking which, when wanting to stop A.S.A.P., is a large loss.

Also, if you are driving a newer diesel car and never getting above a couple thousand RPM it could be doing the car a disservice, a few people we know who drive like that have problem after problem with blocked particulate filters, open it up, clear the cobwebs every once in a while. I may well be totally wrong here, but that's what the issue seemed to be.

A Bandit 600 can be ragged around all day, every day. Running to redline in every gear again and again. It's a solid engine and it's designed to be.

Anyway, my TL;DR: Don't sit at at low revs all the time, run it right around the dial occasionally and always sit so if you lift your foot/hand off the throttle, the deceleration is instant and noticeable without touching the brakes, it's what I was taught to do.
____________________
"Four wheels move the body, two wheels move the soul."
Current Vehicles: '89 Kawasaki KDX200, '99 Yamaha XV535, '00 Honda ST1100 Pan-European, '08 Suzuki GSX-R1000, '08 Mitsubishi Lancer GS4 2.0 TDCi, '15 BMW 1 Series 116d Sport Turbo.
CBT: 27/08/08. Theory: 04/09/09. Module 1: 16/09/09. Module 2: 01/10/09.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :

PostPosted: 19:32 - 22 Dec 2012    Post subject: Re: What is the best way to ride re engine life? Reply with quote

Going too slow for the gear, like 6th or 5th at 30 will not do bearings any good. trying to use full throttle at this speed, in high gear, gives a very satisfying roar, but will accelerate very, very slowely.

On a cbr600 the fast idle speed is 3000rpm, and is best to keep above this. Engine warmed up, high revs will do no damage.

however my dad has done 110k miles in his nissan primera, he stalls atleast 10 times per journey and is almost always in 5th. suprised it has lasted this long.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Wave2k
G's Stalker



Joined: 06 Apr 2004
Karma :

PostPosted: 19:58 - 22 Dec 2012    Post subject: Reply with quote

On an older bike engine isnt usually amongst my biggest concerns.

Gearbox seems to be the biggest major component that fucks up in modern era bike of age.

Just look at the R6 for example or Kawasakis from the same era (96-02)
____________________
Ducati 1299 Panigale
2009 Corvette C6 z51
RS125->CBR400->RXS100->GSXR750K2->Ducati749S->CBR600RR5->TL1000R->DRz400->RSVR1000->Honda VTR SP1->CBR400->GSXR1000K6->Honda H100->CBR600RR3->Ducati1299
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Kwakki Si
Trackday Trickster



Joined: 08 Jan 2012
Karma :

PostPosted: 20:14 - 22 Dec 2012    Post subject: Reply with quote

Man up and fucking redline it everywhere! Stop being a pussy, bikes are fun man! You must get so bored on your rides!
____________________
MOD1 passed 26/01/12... MOD2 passed 08/02/12
My current ride: ZX6R NINJA G2, The GREEEEN one!
Is it a bird? Is it a plane? No, it's a mother fucking motorbike!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Nb
World Chat Champion



Joined: 17 May 2005
Karma :

PostPosted: 20:58 - 22 Dec 2012    Post subject: Reply with quote

I tend to stick to 6k rpm mostly, if im in a serious hurry i might let her go up to 9k rpm but thats generally not needed.
My bike seems happiest at about 5k rpm, perhaps i have too much mechanical sympathy. Laughing
____________________
Cbr1100xx blackbird gone, mk4 golf gt tdi chav now
Colin1 wrote 'Im grateful for what i can get, which isnt all that much.'
Columbus travel insurance are crap!! Do not use!
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 13 years, 333 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT
Goto page 1, 2  Next
Page 1 of 2

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: biskey (www) - Page Generation Time: 0.07 Sec - Server Load: 0.22 - MySQL Queries: 14 - Page Size: 129.22 Kb