Berkshire motorbike wiring/ repairs

[Jasond5463]

Hi all, just joined this forum.

I was wondering if anyone can recommend any decent motorbike service and repairs garages near the Maidenhead area? Does anyone have a rough idea of how much it would cost to replace my bulb and redo the wiring as the main beam wont work without it being done.

I cant imagine it costing so much?

Thanks

Jason

[Casper]

They will rape you mate. Get a wire diagram for your bike and DIY. Auto sparks can be £75 per hour.

[Jasond5463]

OK mate, thanks for the reply.

[mudcow007]

what bike is it?

its full of knowledgeable peeps on here who are happy to help...as long as you get your hands dirty aswell...

[Jasond5463]

Hiya, its a honda cbr 600 fs-2 (Basically the same as an F4i)

Basically the guy who owned the bike before me tried to fit an Xenon light and dont know how he managed to get the wiring in the state its in.

Gonna pop the front fairing off tomorrow and take a look with the brother. Im rubbish at bike mechanics, wiring, servicing etc, first bike and I just get confused by everything .

Will keep you posted if anyone is interested.

PS loving the sunny weather!

[Casper]

Few free manuals here

https://www.manualedereparatie.info/en/categorii/honda.html

Bit of luck its only a mess after the block connector to the main loom. If so just rewire to what the book says and you should be fine. Just take your time.