Suzuki 125gz clutch woes

[richwell1983]

Hi,

Pulled my little gz out with the intention of a shake down around the block before MOT, and i eventually wheeled it back into my garage with the gear leaver totaly solid having not gone anywhere. The bike still runs, and revs as if it is in neutral, but the neutral light isn't on. I couldn't make the gear leaver budge. I open up the clutch housing and on inspection couldn't see anything imidiately wrong. Gave what was in fron of me a clean, put it back on, and still no joy. I only had limited time as had to be in work.

Is there a "usual" faul that would cause this. What should i investigate first?

Thanks in advance

Richard
____________________
GZ125, Ninja 250r 76 Norton Commando 850, 1989 K250a (project)

[unitynotsocri...]

If its been standing then the plates are stuck together,if not I'll give you £50 quid for it.

if you can get it in gear,any gear then rock it back and forth to unstick the plates,or take the plates out and clean them.

you could try hitting the gear leaver shaft with a hammer....gently while wiggling lever,this may help if the g box selector plate has jammed on its drum.
____________________
nearly a normal tax paying tosser.......with ferrileness suzi100,cg125,cb125scb100n,cb175,cd100,cj250t,kh250,c15,125 bantam,super 6,rickman gs750,xt500,250rs,dt175,lifan125,dolomite1850,metro,Morris220ld,morrisfg,leyland princess,range rover,corsa,vw camper .now struggling with legs. MORE ORDER = MORE CHAOS

[FirebladeRuss]

Hey, that's my old bike picture!
____________________
Twitter is for people who can't STFU even when they're by themselves

[richwell1983]