Yamaha YBR Mirror Connector

[Nandonian]

I tried fitting the original mirrors to the YBR in preparation for my test, as the previous owner swapped them with crappy aftermarket ones, could see f all out of them. Anyway, the thread looks like it's stripped on the bolt which attaches the offside mirror.

Looking on ebay they come in different sizes, does anybody know the standard size which the YBR uses?
____________________
Suzuki Katana AY50; Peugeot Jetforce C-Tech 05+06; Honda CG125 ; Yamaha YBR125; Aprilia RS125 FP; Lexmoto XTRS 125; Aprilia RS125 Race Replica; Aprilia RS125 Extrema FP; Seat Ibiza FR 1.9 TDI

[recman]

Someone's tried to fit a nearside mirror on the off-side fitting.
The nearside and offside mirrors have opposing threads.

Is the thread completely stripped right into the fitting?
If not, you may be able to still pick up enough of the old thread to fit a proper threaded off side mirror in there.

[Vincent]

Measure yours......they should either be M10 or M8 and Yamaha usually use 1mm pitch threads. As above, the right hand mirror should have an opposite thread, this is so that it loosens if the bike is dropped rather than breaking something.
____________________
Space Is Deep