oh deary me.

[Timmeh]

Opened the garage this morning to see the bike sitting in a little puddle, seems like the rear suspension piston seal has let go and pissed itself.

Rode it to work anyway because I have no choice, didn't feel any real difference. The spring is still springing.

Found a replacement, so my question is can I replace the duff unit without taking the swingarm off? Stolen pic cos my cam phone is b0rked.

https://www.bikefarmmv.de/pics/1%201%201%20yamaha%20tzr%20125%20high%20up%20kit%2030mm.jpg


cheers dears

____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you

[Pete.]

Usually, yes. Depends if there's a remote reservoir on top and if that will pass through the swing-arm cutout. You'll have to remove the knuckle and those dogbone bolts can be VERY tight.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good

[Timmeh]

No res or any other gubbins on this, it's about as basic as you can get.

cheers pete
____________________
GSXR400 x2 | '94 RVF400 | '93 TZR125 4DL (again)
20:22:30 BLUEX5: i would love to be forced to undergo a**l plugging with different sizes
20:48:18 Temeluchus: comp you hunk of smouldering homos3x you