Bandit 6 indicators

[Symon27]

So my b6 has led indicators and they are not working, they come one but don't flash, I've found the relay and it's just a two pin one. I'm guessing I've just gotta get a led 2 pin relay and it wok again?
Anything else stopping my indis from flashing?
Cheers
____________________
Honda Nsr 125 - Sold
Zxr 400 - Sold
Bandit 600 - Current (Y)

[RhynoCZ]

First of all, use relevant sections of this forum.

Next, try to swap +/-. LEDs are NOT bulbs, you can NOT swap +/- as you like it, because LED lets the current only one way, you have to have + and - right. Take one LED flasher off and plug it right to the battery, so you see what I'm talking about. If the relay worked with bulbs it then shall work with LEDs too, it'd be a bit faster, but working.

EDIT: Sorry, I've just got what you are saying, the problem is most likely in the relay or you're getting a short circuit somewhere.
Ask a mate with the same relay, if he could let you test his in your bike, first.
____________________
'87 Honda XBR 500, '96 Kawasaki ZX7R P1, '90 Honda CB-1, '88 Kawasaki GPz550, MZ 150 ETZ
'95 Mercedes-Benz w202 C200 CGI, '98 Mercedes-Benz w210 E200 Kompressor