Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Running lean

 Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

SQL
World Chat Champion



Joined: 09 Aug 2012
Karma :
PostPosted: 21:32 - 09 Oct 2013    Post subject: Running lean Reply with quote
Bike has been playing up, Derbi 125 4v engine no mods.

If the bike is difficult to start and holds back (Laggy) under acceleration is it running too rich or lean? (I have heard these are lean from factory to pass emission blah blah too.

the bike runs sweet inbetween 7-10.5k

I would do a plugchop but its not very practical as no kill switch and I can't get plug out without lifting tank up and out of place.

Anything I can do to confirm this?
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Ariel Badger
Super Spammer



Joined: 02 Dec 2006
Karma :
PostPosted: 22:57 - 09 Oct 2013    Post subject: Reply with quote
New plug and clean the carb.
____________________
Bikers make great organ donors, get 115 on your licence today.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
_Iain_ This post is not being displayed because the poster is banned. Unhide this post / all posts.

SQL
World Chat Champion



Joined: 09 Aug 2012
Karma :
PostPosted: 23:22 - 09 Oct 2013    Post subject: Reply with quote
_Iain_ wrote:
Plug chop or go see the dyno guy & get him to stick an A/F ratio sniffer up the tailpipe.

Place near brands does three power runs for £25 apparently, myself & paddy were going to take a trip up there soon as he's got a power commander on the TL & I'd like a baseline dyno before fiddling with the H100 so as to judge the effect my tinkerings had. Welcome to come with? Mr. Green


gonna richen it see if it improves ill be up for dyno, time to unleash my 15 horses Twisted Evil
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

SQL
World Chat Champion



Joined: 09 Aug 2012
Karma :
PostPosted: 23:23 - 09 Oct 2013    Post subject: Reply with quote
Ariel Badger wrote:
New plug and clean the carb.


Been done I have 2 new plugs and a iridium too, carb is clean as a whistle.
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Kickstart
The Oracle



Joined: 04 Feb 2002
Karma :
PostPosted: 00:13 - 10 Oct 2013    Post subject: Reply with quote
Hi

Try lifting the needle a notch in the carb (or if not adjustable, just a small washer under the clip for the needle to lift it a bit).

However does sound like it is a bit lean, but it might be lean at some revs and rich at others. And it can be lean for other reasons (blocked fuel filter, blocked fuel tank breather, kinked fuel hose, split fuel tank vacuum hose, etc).

All the best

Keith
____________________
Traxpics, track day and racing photographs - Bimota Forum - Bike performance / thrust graphs for choosing gearing
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

temeluchus
World Chat Champion



Joined: 01 Oct 2008
Karma :
PostPosted: 06:32 - 10 Oct 2013    Post subject: Reply with quote
If the bike has previously been fine and is stock, look for air leaks/splits in all the rubber bits or if anything has dropped off somewhere.

Could possibly also be a failed oring, gasket, choke assembly or float needle in the carb.

Might be worth replacing the spark plug as a matter of course, that will also give you some indication of what's going on.
____________________
Some shite cruiser. Now with guns and FREEDOM!
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 355 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.09 Sec - Server Load: 0.78 - MySQL Queries: 14 - Page Size: 54.97 Kb