The very last part I need........

[TomReilly]

The sprocket for my Tmec Enduro 125

Impossible to find for the chinky bike, but if anyone knows anything or knows how to find one let me know?

Any measurements I can give etc? I found a spares and repair for the same bike but somebody beat my too it.
____________________
Motorcycle riding can be really cozy. If you want to be a little closer to your passenger, brake a little quicker for the next stop.

[hmmmnz]

apparently the rear sprocket is the same as the derbi senda 125 so that should be easy enough to source,
and the engine based on a honda xr125, so front should be easy enough as well.

wemoto stocks parts for both bikes,
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches

[nowhere.elysium]

Try either www.chinesemotorcyclepartsonline.com or www.china-parts.co.uk - I believe it's a 167FML engine, so anything that corresponds to that should fit just fine.
____________________
'10 SV650SF, '83 GS650GT (it lives!), Questionable DIY dash project, 3D Printer project, Lasercutter project

[P.]

Quick google suggests XR sprockets fit.

Wouldn't gospel it, possibly 156/157fm engine so your basic chinky pushrod.

[TomReilly]

I also heard the derbi senda 125 rear sprocket fits, so just bought one to try out, better than nothing I guess, because I can't even ride the bike without one its that worn!
____________________
Motorcycle riding can be really cozy. If you want to be a little closer to your passenger, brake a little quicker for the next stop.