Speedfight 2 50CC Ignition Lock wiring

[nabbelol]

Hi
My Speedfight 2 got stolen and hotwired. After the scooter had been missing for about 4 weeks the police returned it to me. The thief’s had messed it up real bad
I’m trying to fix most of it myself, but I’m facing an issue connecting a new ignition lock. I have read many forums but none of the “recipes” seems to fit the color codes on my wires, so I haven’t dared to try to connect/solder any yet. I have a black, red, green and white cable…
https://s17.postimg.org/mjkavf96j/ignition.jpg

The thief has also pulled this white wire out and when returned to me it was connected to the battery… Anybody know what that cable does?
https://s9.postimg.org/7288krf3v/White_one.jpg

[truslack]

https://www.bikechatforums.com/viewtopic.php?t=184540

Find the wiring diagram, it will tell you all you need to know.
____________________
Current: Suzuki RG 125 Gamma, Honda H100, Triumph Tiger 800XC, Suzuki SV650 (minitwin)

[nabbelol]

Thank you for the reply.

I have studied the diagrams, but unfortunately none of the 2 diagrams for speedfight quite match what I see in real life. For example the ignition switch on the diagrams has 5 cables. 2 of them striped (two colors). On the scooter I can only see 4 cables, single color… The thief might have removed one completely, but cannot see any trace of it..


I will print the diagram and try to measure to find the correct cables.. It looks like the color codes on the "Instruments" part is a match for example.. Strange..

[nabbelol]

What should I do when the wiring diagram that was linked to does not match what I see in real life? (Attached a snippet of wiring diagram and the complete one)

The striped red/dark cable between the Ignition switch and the Alternator is missing. The thief’s have not ripped it out, I see no evidence what so ever that this cable has existed. The white/black one is there and can be connected to the Ignition switch…
And the CDI unit on mine has 5 cables going in/out. In the diagram it has only 4…

I have gotten the blinkers, break light and horn working by connecting the black and red cable as on the diagram. The start motor also works, but I cannot get a spark and get the engine running…

This is a scooter purchased in Norway, I guess they might change the wiring some on each model?

If anybody have any information or pictures of doing a similar job, anything would be appreciated.
I’m also interested if anybody have pictures of the plug that is supposed to be between the wires and the ignition switch..