 jaz9000 L Plate Warrior
Joined: 27 Oct 2013 Karma :   
|
|
 The Artist Super Spammer

Joined: 06 Jan 2008 Karma :  
|
|
 jaz9000 L Plate Warrior
Joined: 27 Oct 2013 Karma :   
|
|
 jaz9000 L Plate Warrior
Joined: 27 Oct 2013 Karma :   
|
 Posted: 12:52 - 07 Mar 2014 Post subject: |
 |
|
So its been a while since ive tried sorting this but the other day i replaced the rectifier and it did have an effect and now i have a new problem. Now my indicators will work with the lights off but i have to tap my brake first. When i say tap i mean i only have to apply the brakes for a split second then i can let go and the indicators will stay on until i disengage them. This is becoming extremely annoying. From what i can see on the haynes wiring diagram the brake switches, light switch, indicator switch are all connected which looks like a common line, which i know is energised all the time so the fault is either between the negative side of the relay and the switch or god knows...
Any Ideas? ____________________ Some people say im a bit crazy... i dont disagree:) |
|