Help & FAQs    Search BCF    Members    Groups    Events Calendar
Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Bike wants to stand up through the corners

 Reply to topic
Bike Chat Forums Index -> General Bike Chat
View previous topic : View next topic  
Author Message

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :
PostPosted: 09:05 - 29 Apr 2014    Post subject: Bike wants to stand up through the corners Reply with quote
Only noticed this when going from the GSXR to the ZX9, the front end handling feels very strange... when I tip into a corner, the bars feel like they are fighting me to keep the bike upright, so a lot more input is needed, whereas the GSXR seems to hold a line when I give it one.

It doesn't seem to want to hold tight lines especially.

What could this be?
____________________
Current: Yamaha FZ1 '07 | GSXR 750 SRAD

Past: CB125TDC | TZR125 | GPZ500 | CBR600F3 | ZX9-R | GSXR1000 K4
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

bacon
World Chat Champion



Joined: 09 Jan 2009
Karma :
PostPosted: 09:33 - 29 Apr 2014    Post subject: Re: Bike wants to stand up through the corners Reply with quote
Snorty wrote:
Only noticed this when going from the GSXR to the ZX9, the front end handling feels very strange... when I tip into a corner, the bars feel like they are fighting me to keep the bike upright, so a lot more input is needed, whereas the GSXR seems to hold a line when I give it one.

It doesn't seem to want to hold tight lines especially.

What could this be?


Don't mean to state the obvious but are the tyre pressures spot on?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Aff
World Chat Champion



Joined: 05 May 2011
Karma :
PostPosted: 09:45 - 29 Apr 2014    Post subject: Re: Bike wants to stand up through the corners Reply with quote
bacon wrote:


Don't mean to state the obvious but are the tyre pressures spot on?


And not squared off?

Head race bearings feel notchy?
____________________
Current Bikes:Honda 929RR Fireblade, Honda CD200 Benly (Project), Stomp Z2 140
Electric Bike Project
 Back to top
View user's profile Send private message You must be logged in to rate posts

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :
PostPosted: 10:17 - 29 Apr 2014    Post subject: Reply with quote
The tyres aren't squared off but they are fairly old - when I first got the bike on the road from being laid up (by the previous owner) it would just wheelspin itself silly on any kind of power. They seem to be OK now though - I've had some real blasts on them.

How can I check the head bearings? No main stand Sad
____________________
Current: Yamaha FZ1 '07 | GSXR 750 SRAD

Past: CB125TDC | TZR125 | GPZ500 | CBR600F3 | ZX9-R | GSXR1000 K4
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Wafer_Thin_Ham
Super Spammer



Joined: 18 Nov 2005
Karma :
PostPosted: 10:19 - 29 Apr 2014    Post subject: Reply with quote
Snorty wrote:


How can I check the head bearings? No main stand Sad


Get a mate, and then he can pull the front wheel off the ground on the sidestand, whilst you check the head bearings for play. Thumbs Up
____________________
My Flickr
 Back to top
View user's profile Send private message You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 10:23 - 29 Apr 2014    Post subject: Reply with quote
A zx9r handles worse than a gsxr750?

That's not a news shocker TBH Smile
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

recman
World Chat Champion



Joined: 26 Mar 2012
Karma :
PostPosted: 10:25 - 29 Apr 2014    Post subject: Reply with quote
Different fork angle/wheelbase?
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Irezumi aka Reuben
Carrot Top



Joined: 28 Sep 2004
Karma :
PostPosted: 10:30 - 29 Apr 2014    Post subject: Reply with quote
how olds the ZX9? Potentially rear suspension linkages old/rusting/seizing?
____________________
Pictorgraphicalfantastical
 Back to top
View user's profile Send private message You must be logged in to rate posts

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :
PostPosted: 10:40 - 29 Apr 2014    Post subject: Reply with quote
Irezumi aka Reuben wrote:
how olds the ZX9? Potentially rear suspension linkages old/rusting/seizing?


It's only got 14k on it, but '98.

I don't expect it to handle as well as the GSXR, it just doesn't feel quite "right" - maybe I'm just expecting too much of it.
____________________
Current: Yamaha FZ1 '07 | GSXR 750 SRAD

Past: CB125TDC | TZR125 | GPZ500 | CBR600F3 | ZX9-R | GSXR1000 K4
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Pete.
Super Spammer



Joined: 22 Aug 2006
Karma :
PostPosted: 10:45 - 29 Apr 2014    Post subject: Reply with quote
My mate had one that he complained about handling heavily. He fitted wide bars on it and said it was a huge improvement.
____________________
a.k.a 'Geri'

132.9mph off and walked away. Gear is good, gear is good, gear is very very good Very Happy
 Back to top
View user's profile Send private message Visit poster's website You must be logged in to rate posts

Fizzer Thou
World Chat Champion



Joined: 06 Aug 2011
Karma :
PostPosted: 12:39 - 29 Apr 2014    Post subject: Reply with quote
I recently had the same problem on my Exup1000.The front tyre looked okay and the tyre pressures were at 36psi.

I have spare wheels so changed them over - instant differance Thumbs Up

I have also had this on my R1.But a slightly differant reaction.I would go into a right hander and the front would slid.I knew that the tyres were correct as I check them before every ride.I changed the front tyre and again - instant differance.
____________________
Just talk bikes.What else is there?

Always have a 'Plan B'
 Back to top
View user's profile Send private message You must be logged in to rate posts

Snorty
World Chat Champion



Joined: 13 Oct 2010
Karma :
PostPosted: 12:42 - 29 Apr 2014    Post subject: Reply with quote
Fizzer Thou wrote:
I recently had the same problem on my Exup1000.The front tyre looked okay and the tyre pressures were at 36psi.

I have spare wheels so changed them over - instant differance Thumbs Up

I have also had this on my R1.But a slightly differant reaction.I would go into a right hander and the front would slid.I knew that the tyres were correct as I check them before every ride.I changed the front tyre and again - instant differance.


What would this suggest? I don't have spare wheels but mine are not buckled. The only issue with them is the usual Kawasaki (of that era) brilliant paint on the rims.
____________________
Current: Yamaha FZ1 '07 | GSXR 750 SRAD

Past: CB125TDC | TZR125 | GPZ500 | CBR600F3 | ZX9-R | GSXR1000 K4
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

_Troy_
World Chat Champion



Joined: 11 Feb 2011
Karma :
PostPosted: 13:07 - 29 Apr 2014    Post subject: Reply with quote
I used to get this on my old ZX6, but noticed some oddities while riding in a straight line too. Turned out to be the head race bearings. Once they were changed it was like a completely different bike.
____________________
Current bike: ZX6R J1
Previous bikes: CLR 125 | GS500 | ZX6R G2 | SV650
 Back to top
View user's profile Send private message You must be logged in to rate posts

Old Git Racing
World Chat Champion



Joined: 08 Aug 2009
Karma :
PostPosted: 13:28 - 29 Apr 2014    Post subject: Reply with quote
I think you will find the difference in geometry /weight/chassis technology will be the main reason. What year was the Gixxer? I don't think the ZX9 was known to be a sharp handler when it came out.
Assuming everything is in good nick drop the yokes 15mm and see if that helps.

OGR
____________________
2022 Tiger Sport 660 2019 Street Twin 2003 K3 gixxer 1000 1998 Srad 600 track hack
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 129 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> General Bike Chat All times are GMT + 1 Hour
Page 1 of 1

 
 You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 
Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.10 Sec - Server Load: 1.35 - MySQL Queries: 14 - Page Size: 87.61 Kb