what to wear to a recruitment consultant

[andyscooter]

off to see one later but have to go on the bike

what do people wear am planning on smart jeans and a shirt

jacket and helmet will be stored on the bike whilst inside and can park just down the road
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet

[JonB]

These people will put you in front of prospective employers. So give them the confidence to do this by dressing appropriately. Suit and tie everytime. First impressions count most.
____________________
Be careful whose advice you buy, but, be patient with those who supply it. Advice is a form of nostalgia, dispensing it is a way of fishing the past from the disposal, wiping it off, painting over the ugly parts and recycling it for more than it?s worth.

[slowlydoesit]

[Rogerborg]

"Recruitment Consultant" can mean anything from a six/seven figure headhunter, to a gang boss who delivers warm bodies measured by weight.

Thing is, they're just pimps and in it purely for the money. They'll put just about anyone forward for just about anything, often irrespective of whether you're a good match or not. I wouldn't stress over it too much: you can always sniff out and apply directly for anything worthwhile that comes up.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike

[andyscooter]

company i want to get into only uses this recriutment company

i know the bloke who im seeing as he used to work in my local (wheather this is a good thing i dont know)

i know the company has jobs going at the moment so that helps
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet

[anthony_r6]

Suit and tie for best impressions.
____________________
Ted : "Maybe he's agoraphobic."
Dougal : "Jack scared of fighting? I don't think so, Ted."

[Ariel Badger]

Suit and tie, end of.
____________________
Bikers make great organ donors, get 115 on your licence today.

[dydey90]

https://www.upscalehype.com/wp-content/uploads/2013/04/Usher-wears-a-Suit-on-Custom-Motorcycle-in-Los-Angeles-Leaving-Barneys-3.jpg
____________________
This post is probably not serious and shouldn't be taken literally.
Past: CBR125,ER6f NINJA 650, ZZR600 Current: VFR750

[Rogerborg]

[Motorhate]

[andyscooter]

well im back

of to said company next wendsday for induction test (playing with lego in the consultants excact words)

as long as i pass that then i could start soon as the following monday

thanks for all the advise everyone

also meeting my mate who works there for a pint later
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet

[map]

[Rogerborg]

[Llama-Farmer]

If it's a bad recruitment consultant, it won't matter.

If it's a good recruitment consultant, they appearance and first impressions will matter lots.

So suit and tie.


Although you haven't given much info regarding the industry they recruit to, or the industry you're looking to go into. That may dictate a different dress code is the norm
____________________
Current Bike: 1999 Honda CB600 FX Hornet
Next Bike: I want a CBR-RR. And I want an F800 GS-A. And a VFR 800. Can I have all 3?
Dream Bikes: Honda VFR750R RC30, Honda NSR500, Ducati 996 R

[andyscooter]

[Rogerborg]

[G]

[hachi8]

You should wear the same as you would to an official Interview. Afterall they will be passing their first impressions onto your potential new employer.
____________________
K7 GSXR 1000 - The Beast!

[andyscooter]

forgot to update this


got job but not starting till june after i get back off my holidays

going to do a bit of tempory stuff till then

also still got my motocross track i work on
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet

[P.addy]

So what exactly is it that you will be doing.

Also, this motocross track, details?

[andyscooter]

i will be working an injection moulding press to make car lights for toyota peugeot honda and nissan

have to do this job for a bit until i can move into the quality control area (have done this a few times for different companys )

track is in bromsgrove called foxwalks motorcross (also known as grafton track)open on every other sunday its been on the farm since 1973 but got a bad rep the last few years
cracking track to ride but we get a problem with chavs and pikeys hence me being there to keep an eye on them and give them a bollocking
costs 25quid to ride all day

owner is a good mate of mine so i went to help for a few weeks four years ago
____________________
gilera runner vxr200 (chavped)
if its spelt wrong its my fat fingers and daft auto correct on my tablet