Welding and electrics?

[Itchy]

TL:DR

Want part of the subframe welded..

But I'm too lazy to take the bike apart and remove the subframe.

So to prevent bike electrical damage what needs to be done?

I'm thinking remove CDI (expensive part) and the battery and fuses.

Enough?
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[Fisty]

Yep.

(that's how you give an answer mike)
____________________
Quietly and consistently taking the piss.
TL1000R | Hayabusa | ZXR400 | TL1000S | Bandit 400 V
Fatter and faster than Fret

[groovylee]

^^^^wot he said
____________________
Past - 1988 honda revere 600, 1996 kawasaki gpz500s, 1999 Yamaha R6

Current - 2002 Aprilia RSV1000R & 1999 Kawasaki ZX6R

[davebike]

Good welder will ensure good earth point as near as possible to work and should be no problem with a Jam bike

I weld bit of bikes often seldom remove anything not had any problems

Dave
____________________
Dave
NC750Xdct + others at work !
davebike1@gmail.com

[hmmmnz]

just the battery is really needed, but cdi is probably a good idea,
no need to remove fuses
____________________
the humans are dead
I kick arse for the lord
Wiring Diagrams BIDNIP it bitches