Clutch Problems AM6

[goldmansean]

After attempting to change my clutch cable on my Rieju rs2 Matrix 50, which has an am6 engine, the clutch seems to be not working entirely,
its not the lever or the cable as i disconnected this and manually tried to push the clutch in and it was still not working, it worked fine before and im not sure what i have done, when the bike turns over on a stand the back wheel just spins like the gears are engaged and this stops when the bike is put in neutral, so im guessing its only a problem with the part where the cable attaches.

i only have a basic knowledge of bikes so any help would be appreciated.

VIDEO OF BIKE PROBLEM - https://youtu.be/UuaVElJs-Ho

[Vincent]

Being able to push the lever with your finger suggest to me something is awry behind the casing.

When you do the test in the video, have you tried putting the brake on the back wheel while it's still spinning in gear? How long was the bike off the road, sometimes the plates can stick and need freeing off.
____________________
Space Is Deep

[MattWadz]

looks like the Clutch Pushrod? cant remember if thats what its called, or clutch actuator has popped just out of reach, pull the clutch casing off and have a look, it should be a circular shape flat thing with a dowel coming off it have a look under the clutch side casing
____________________
Pitbike x2, Mini Moto x4, China Quad, 02' Suzuki AP50 > 03' MBK Nitro > 86' Suzuki GP100 > 02' Yamaha Jog R > 57' Honda Lead 100 > 95' Piaggio ZIP Rst 50 > 51' Suzuki TS50x > 83' Honda CB125TDE Twin > 51' Yamaha Aerox > 98' Kawasaki KX60 > 89' Yamaha DT50MX > 80's Honda QR50 > 05' CG clone > 125cc China Pitbike > 91' Honda MTX125 RW-L > 09' Peugeot Speedfight 2 LC LR > Lucky MX 140cc > Apache Tomahawk 50 Quad (current = 2010 Yamaha WR125R