Making a gasket.

[Gazz]

As some of you know, I am doing the stator on my Deauville, but am struggling to find a gasket for that particular enginecasing.

Tried ebay, wemoto and general Google searches but cannot find anything.

The bike is a Honda Deauville NT650V4 if anyone wants to try a quick search on my behalf.

Is there any way I could make a gasket for it? And using what parts?

Was thinking about using some cardboard, but there is some oil in that area and not sure if it would leak or not.

[The Shaggy D.A.]

Snowy did a "How To" a while back :-

https://www.bikechatforums.com/viewtopic.php?t=220475
____________________
Chances are quite high you are not in my Monkeysphere, and I don't care about you. Don't take it personally.
Currently : Royal Enfield 350 Meteor
Previously : CB100N > CB250RS > XJ900F > GT550 > GPZ750R/1000RX > AJS M16 > R100RT > Bullet 500 > CB500 > LS650P > Bullet Electra X & YBR125 > Bullet 350 "Superstar" & YBR125 Custom > Royal Enfield Classic 500 Despatch Limited Edition (28 of 200) & CB Two-Fifty Nighthawk > ER5

[Itchy]

Phone David silvers? there are always lots of bits and pieces which they have but don't list for one reason or other. For all of my Hondas they've had obscure parts.
____________________
Spain 2008France 2007Big one 2009 We all die. The goal isn't to live forever, the goal is to create something that will. In the end, your life will flash before your eyes. Make sure it is worth watching.

[Robby]

Honda part no. 11395MV1850

Not in stock with David Silver.

Try reusing the existing one first. There's no pressure behind it.

[Islander]

If you can't be bothered to make your own you can always use some Three Bond liquid gasket.

[LongJohn22]

[Gazz]

[Shaft]