Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Snap!

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

KingKong
Crazy Courier



Joined: 03 Sep 2011
Karma :

PostPosted: 01:37 - 04 Aug 2014    Post subject: Snap! Reply with quote

Hi

Bike chain snapped, not sure why. Previously (2.5 weeks ago) took to mechanic to tighten chain. He did it within a minute by using a power device and the nuts/bolts around my rear wheel. Chain felt tight. Could it have snapped because he overtightened it; or is it because it might be quite a few years old, despite having only served 4500 miles?

Also, since the chain guard has snapped from the swing-arm (see photo), is this easily repairable or would it be classed as a write-off?

Yes, I'm an air-head when it comes to mechanical aspects Embarassed
____________________
Kwak 636 (2005)

Past - 2016 Ninja 300 (dark grey); K4 GSXR 600 (sexy yellow); 2002 CBR600FS; 2004 GSXR 1000; 2006 Kwak 636; 2005 Yamaha XVS 1100 Dragstar (facepalm); 2005 Kwak 636; 2011 Yamaha R125.
 Back to top
View user's profile Send private message You must be logged in to rate posts

ripzay
Nitrous Nuisance



Joined: 01 Dec 2008
Karma :

PostPosted: 02:05 - 04 Aug 2014    Post subject: Reply with quote

Looks to me like you've come off lucky - chain snapping can end bad - from holes in engines to wheel lockups and you being chucked down the road.

Chain snapping can be caused by any number of things, from over-worn sprockets, stretched chain, tight chain, loose chain, insufficient lubrication etc. etc.

Would be hard to really say what's actually caused it to snap, especially now that it has snapped - it's already destroyed any evidence you have.

As far as the chain guard mount goes..

not a brilliant photo but it looks like it's aluminium?

I'd say you could grind off the old weld flat (will be very soft and very easy to grind if it's aluminium) and have the tab welded back on.. a tenner to a local welder will probably do it if you can take the swingarm off and take it down.

As an aside - I'd recommend that you replace the sprockets along with the chain this time around, the chain snapping could have bent / warped the sprockets and I personally wouldn't risk keeping the same sprockets.
____________________
Current: 2005 KTM SuperDuke 990
Previous: 1996 Suzuki Bandit 600
Previous: 1994 Suzuki GSX-R 400
 Back to top
View user's profile Send private message You must be logged in to rate posts

KingKong
Crazy Courier



Joined: 03 Sep 2011
Karma :

PostPosted: 02:17 - 04 Aug 2014    Post subject: Reply with quote

Ripzay - when you put it like that then I am very fortunate this happened without any injury/material damage to the bike.

I definitely will replace the set with new sprockets for certain. Thumbs Up
 Back to top
View user's profile Send private message You must be logged in to rate posts

Bunny Lingus
Traffic Copper



Joined: 20 Apr 2014
Karma :

PostPosted: 01:43 - 06 Aug 2014    Post subject: Reply with quote

Tighten your own chain. It is sooo easy. Save you some money & guarantees peace of mind...
____________________
Bunny Lingus & The Flipside Faggots
 Back to top
View user's profile Send private message You must be logged in to rate posts

KingKong
Crazy Courier



Joined: 03 Sep 2011
Karma :

PostPosted: 01:55 - 06 Aug 2014    Post subject: Reply with quote

Bunny Lingus wrote:
Tighten your own chain. It is sooo easy. Save you some money & guarantees peace of mind...


True.

Will do; a lesson learned Thumbs Up
____________________
Kwak 636 (2005)

Past - 2016 Ninja 300 (dark grey); K4 GSXR 600 (sexy yellow); 2002 CBR600FS; 2004 GSXR 1000; 2006 Kwak 636; 2005 Yamaha XVS 1100 Dragstar (facepalm); 2005 Kwak 636; 2011 Yamaha R125.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 12 years, 63 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.06 Sec - Server Load: 0.65 - MySQL Queries: 14 - Page Size: 43.88 Kb