Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Compressor For Blowing Down

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

nickyboy4
Nova Slayer



Joined: 01 Jan 2006
Karma :

PostPosted: 23:08 - 06 Feb 2015    Post subject: Compressor For Blowing Down Reply with quote

I've been down the route of trying to do my own spraying and using air tools but never had a compressor that's done the job properly, now i just want a simple, small compressor, enough to blow up bike tyres and blowing out stuff like carbs and calipers. Money is tight so what sort of size am i needing to do these simple tasks, would a 25 litre be ok or could i go even smaller?
Thanks for any replies
 Back to top
View user's profile Send private message You must be logged in to rate posts

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :

PostPosted: 00:41 - 07 Feb 2015    Post subject: Re: Compressor For Blowing Down Reply with quote

nickyboy4 wrote:
...enough to blow up bike tyres and blowing out stuff like carbs and calipers. Money is tight so... could i go even smaller?
Thanks for any replies



You're welcome Wink
https://images.esellerpro.com/2462/I/314/129/PUMP2.jpg
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :

PostPosted: 01:46 - 07 Feb 2015    Post subject: Re: Compressor For Blowing Down Reply with quote

Footpump is ideal. Ive fitted about 20 (tubeless) tyres without one. If I had a compressor it would not get used, too much space...
 Back to top
View user's profile Send private message You must be logged in to rate posts

mentalboy
World Chat Champion



Joined: 05 May 2012
Karma :

PostPosted: 02:48 - 07 Feb 2015    Post subject: Reply with quote

I know my earlier post seemed a little flippant but it's surprising what you can get for very little money.
A marginally larger, double action upright pump that is anchored with your feet will give you more than enough air for the occasional tyre inflation.
Carbs respond better to a decent solvent and just a light blow to remove loose material
Calipers are a little trickier but with some tweaking of the pump connector it shouldn't be too tricky to screw the end straight into the banjo fitting.

The only drawback is that using a foot pump for operations other than tyre inflation may require more hands than the average human possesses, or some ingenious thinking.
____________________
Make mine a Corona.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Taught2BCauti...
World Chat Champion



Joined: 12 Jan 2012
Karma :

PostPosted: 11:53 - 07 Feb 2015    Post subject: Reply with quote

I have a 25 litre compressor, bought from Lidl years ago, and get quite a lot of use out of it.

Apart from basic tyre inflation and air-dusting, I use it with attachments: Impact Wrench, Nail Gun, Sand Blaster and Drain Cleaner.

I also use if for inflating the kids' paddling pool, and air-mattresses for the occasional sleep-over.

I have a cheap Paint Sprayer attachment too, but only use it for creosoting the shed, garage and fences.
____________________
Honda Varadero XL125(V8)
www.TheFutureIsHere.eu
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
- This post is not being displayed because the poster has bad karma. Unhide this post / all posts.

mudcow007
World Chat Champion



Joined: 01 Feb 2012
Karma :

PostPosted: 14:56 - 07 Feb 2015    Post subject: Reply with quote

yep i got a compressor, had big ideas for it it. i think ive used it twice in 12 months....

now its in the way in my shed Sad
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

kramdra
World Chat Champion



Joined: 28 Oct 2010
Karma :

PostPosted: 15:11 - 07 Feb 2015    Post subject: Reply with quote

[quote="mentalboy"
Calipers are a little trickier but with some tweaking of the pump connector it shouldn't be too tricky to screw the end straight into the banjo fitting.[/quote]

Fail. Use an M10 bolt to block banjo hole and 6mm PVC hose over bleed nipple.

A couple of strokes will get 100psi in the pots and force them out at some speed so hold cloth over them. If one pops out early, G clamp some thick rubber sheet over the hole to get the others out.
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 11 years, 108 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.72 - MySQL Queries: 14 - Page Size: 57.16 Kb