YBR 125 New forks

[MC900]

I need new forks and im buying https://www.ebay.co.uk/itm/Yamaha-YBR-125-Front-forks-left-and-right-legs-2007-onwards-/391054998490?pt=LH_DefaultDomain_3&hash=item5b0cb1bbda just wondering what the labour cost will likely be to fit them. The place i go to charges 40quid an hour, how long does it take to fit these? Cheers.
____________________
Current Ride: Fazer 600 (02) & YBR125 (07)

[kramdra]

I would be very sceptical about the quality of chinese aftermarket fork assemblies. A good used set would probably last longer. I would also check/change the fork oil.

However, very easy to fit. Remove brake caliper, wheel, mudguard, clip ons/bars. Then two bolts for each fork. Refit is the reverse.

Takes me half hour.

[delsol]

I think you will be lucky to find a garage that will assign less than 2 hours for that job.

[Vincent]

If the forks are poor quality.....ie; the chrome on the stantions isn't very good...get yerself some gaiters, they'll do a great job of protecting them from flying stones etc.

This is something you could probably do yourself though, if you have a few of the right tools.

I timed myself removing the forks on my bike recently as someone on here didn't believe me......I think it was something like 14 mins....but that was at full flight. Get an estimate from the garage, tell them your budget, just make sure you can trust them.
____________________
Space Is Deep