Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Speedo is cracked

Reply to topic
Bike Chat Forums Index -> The Workshop
View previous topic : View next topic  
Author Message

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 13:32 - 25 Sep 2015    Post subject: Speedo is cracked Reply with quote

So my speedo's glass cover is cracked and it started off tiny but is now getting bigger and bigger and is about to go across the whole speedo right through the middle, what can I do about it?

Reckon it'd be covered under two year warranty?
 Back to top
View user's profile Send private message You must be logged in to rate posts

Polarbear
Super Spammer



Joined: 24 Feb 2007
Karma :

PostPosted: 13:35 - 25 Sep 2015    Post subject: Reply with quote

I would say it should be, but you can bet you are going to have a 'discussion' with your dealer about how it happened.
____________________
Triumph Trophy Launch Edition
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 13:37 - 25 Sep 2015    Post subject: Reply with quote

That's the problem, I have no idea, it just appeared in the corner and started growing over the course of a few months. Thought it'd stop but it didn't and now it's huge.

Might have to ring them up and see. They can't blame it on any of the modifications I've done to the rest of the bike, right? I haven't touched the speedo or anything near it.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Polarbear
Super Spammer



Joined: 24 Feb 2007
Karma :

PostPosted: 13:42 - 25 Sep 2015    Post subject: Reply with quote

I was thinking more along the lines of 'You must have dropped something on it for that to happen Sir, that isn't a warranty repair'
____________________
Triumph Trophy Launch Edition
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 14:21 - 25 Sep 2015    Post subject: Reply with quote

It's not a consumable part and "you must have done it" can be used as a pretence for fobbing off anything.

Nicey-nice, matey-mate to begin with of course, but at the first sign of teeth-sucking, assert that nothing was "done" to it, that it's a material defect and that they can either replace it themselves or you'll get it done elsewhere and invoice them, their choice.

Best if you actually mean it.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

P.addy
Red Rocket



Joined: 14 Feb 2008
Karma :

PostPosted: 15:04 - 25 Sep 2015    Post subject: Reply with quote

If its actually cracking I'd probably drill the smallest possible hole at the end of the crack to stop it going further the little drop of superglue or silicone.
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts

notbike
World Chat Champion



Joined: 02 Apr 2014
Karma :

PostPosted: 16:59 - 25 Sep 2015    Post subject: Reply with quote

So I drove it up to dealership and had a word with the mechanic and he's taken a bunch of pictures and is going to put it forward to the "warranty team" and see what they say. If they deny it then it's apparently £40 for the replacement part. Not bloody paying that's for sure.

Let's see how it goes anyway.
 Back to top
View user's profile Send private message You must be logged in to rate posts

Rogerborg
nimbA



Joined: 26 Oct 2010
Karma :

PostPosted: 20:17 - 25 Sep 2015    Post subject: Reply with quote

Sad if Kawasaki won't re-reimburse them, but not your problem.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike
 Back to top
View user's profile Send private message You must be logged in to rate posts

chris-red
Have you considered a TDM?



Joined: 21 Sep 2005
Karma :

PostPosted: 20:26 - 25 Sep 2015    Post subject: Reply with quote

If there is an impact mark, you should pay if it is just a crack starting from the edge they should. Kick off if they don't letters, Email, Facebook, Twitter etc.
____________________
Well, you know what they say. If you want to save the world, you have to push a few old ladies down the stairs.
Skudd:- Perhaps she just thinks you are a window licker and is being nice just in case she becomes another Jill Dando.
WANTED:- Fujinon (Fuji) M42 (Screw on) lenses, let me know if you have anything.
 Back to top
View user's profile Send private message You must be logged in to rate posts

dydey90
World Chat Champion



Joined: 01 Oct 2013
Karma :

PostPosted: 20:51 - 25 Sep 2015    Post subject: Reply with quote

If it's a no, £22 off ebay
____________________
This post is probably not serious and shouldn't be taken literally.
Past: CBR125,ER6f NINJA 650, ZZR600 Current: VFR750
 Back to top
View user's profile Send private message You must be logged in to rate posts
Old Thread Alert!

The last post was made 10 years, 348 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> The Workshop All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.28 - MySQL Queries: 14 - Page Size: 63.36 Kb