My Horn.......where is it?

[Miki]

Hi mates..... i'm having a problem with my horn....the whole thing is a shame. is there anyway to replace the whole thing? meaning, from the horn right up to the button on the handle? is it going to cost a bomb?

[kev]

If you are just going to put a normal push button the bars then the whole lot should cost no more than £20.
____________________
20:02:36 Jammy-R6: any holes a goal
20:02:48 kev: even if its a hairy mans arse
20:02:56 Jammy-R6: hell yes

[robbiehall]

What's wrong with it? Is it only squeaking instead of honking?

There is a small adjustment screw on the reverse of most of them which by adjusting in/out can change the tone of the horn, or have a look at the mushroom plate on the front and make sure it hasn't got rusty.
Or are you hoping for a car air horn type effect?

WD40 the contacts after pulling them off the back of the horn.

Tell us what happens after that.

Cheers
Rob
____________________
The older I get, the faster I was.

[Guest]

[Miki]

no man......totally no sound man....... can't find it, where is the "piece" of horn found usually, can what is the shape of it? I really can't find mine....

[baldy]

Should look something like this......
____________________
One day i will rule the world, just not today.

[Dru2000d]

I was suffering from the same problem with my bike. Didn't come with a horn.

It should be on the front of the bike.

I bought a new one for £12 from a breakers yard.

[Jammy-G]

Get 2 small nuts and when mounting the horn to the frame, tighten the irst nut up loosely, so it just holds the horn in place, make sure it doesnt clamp it hard. With the second nut, screw it on after it so it acts as a locking device (when the nuts are tight to one another they wont come undone). I did this and it fixed mine. Remove the horn from the frame and try it when connected up.
____________________
RooRoo: just like the time i stuck my finger up my arse with no lube at all and she didnt talk to me for hours