Suzuki en125 2a wiring info help please

[orbital]

Hello , i recently bought a Suzuki en125 2a, and after checking it over i found a white plastic square socket connector under the seat (coming from the wiring loom) with no plug any where to fit into it.i was just looking for advice of what this is supposed to be connected to. The bike works fine without it being connected .It has six wire coming from it, colours are blue ,black,green,orange,white/black and red . The socket contacts have verdigris on, so I'm not even sure if its ever been connected.
I have tried googling a wiring diagram, unfortunately with no success ,so if anyone could advise me it would be much appreciated.

Many thanks

[Rogerborg]

Alarm/immobiliser connector? If the bike's running fine with nothing plugged in, I wouldn't sweat it.
____________________
Biking is 1/20th as dangerous as horse riding.
GONE: HN125-8, LF-250B, GPz 305, GPZ 500S, Burgman 400 // RIDING: F650GS (800 twin), Royal Enfield Bullet Electra 500 AVL, Ninja 250R because racebike

[linuxyeti]

Hi
This should help
[urlhttps://www.mychinamoto.com/forums/attachment.php?attachmentid=18391&d=1461448283[/url]

Cheers

Tony
____________________
Beware what photos you upload, or link to on here, especially if you have family members on them

[orbital]

Thank you so much for your help guys.After translating the wiring diagram to English, its for an alarm that either hasn't been installed or was previously removed.I really appreciate your help, thank you