Best Dremel cutting disc?

[Rob Fzs]

Not fiddled around with my dremel for a while, just wondering whats the best cutting discs for metal they do now? ta
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30> Yamaha RD350 YPVS F2 > Kawasaki ZZR 600 D1 > Yamaha TZR 250 2MA >Suzuki TL1000R > Yamaha TDR250 > Honda 929 blade > Suzuki SV1000 > Honda H100
Mod 2 Passed 09/06/2011

[ThatDippyTwat]

Sliced a can off a downpipe a couple of weeks back. Zero issues. Reinforced will be knackered quickly, don't bother with the standard ones unless you are desperate. Loads of types of them, I used el-cheapo 30mm, come in a pack of 10 (1 was more than enough).

https://www.ebay.co.uk/sch/i.html?_odkw=diamond+cutting+wheel+dremel&_osacat=0&_from=R40&_trksid=p2045573.m570.l1313.TR0.TRC0.H0.Xdiamond+cutting+wheel+dremel.TRS0&_nkw=diamond+cutting+wheel+dremel&_sacat=0

[techsnap]

Second the diamond ones- much better than the brown abrasive disc type ones that shatter easily.

I've got a set of small cheap ebay diamond ones and they are very useful and seem hard wearing.

[Rob Fzs]

Cheers, had them type ones before and they were okish, maybe i was just expecting too much from them
____________________
'00 Aprilia RS50 > '92 Honda CG > '99 Yamaha Fazer > '91 Yamaha RXS > '79 Suzuki X5 > 01' Honda Cg > 07' Honda Cg > 82' Kawasaki Z200 > suzuki gsxr 400 gk73a > honda vfr 400 NC30> Yamaha RD350 YPVS F2 > Kawasaki ZZR 600 D1 > Yamaha TZR 250 2MA >Suzuki TL1000R > Yamaha TDR250 > Honda 929 blade > Suzuki SV1000 > Honda H100
Mod 2 Passed 09/06/2011

[ThatDippyTwat]

It's a Dremel, not a chopsaw. They are, when you get the knack of it, a precision tool.

That said, when you get out of the puny 12v, 18v DC range, and into the 100W+ 240v stuff, you can get some good, quick results. Still not a Chopsaw though.