Titanium/Stainless Steel Cleaner

Bod · Traffic Copper Joined: 18 Mar 2004 Karma :

Hi all, I have specks of tar and bits of burnt boot rubber on my exhaust and need to get them off. What is the best thing to use to get it off?
Cheer
Bod

binge · Emo Kiddy Joined: 02 Jul 2004 Karma :

Autosol may work. it will take a bit of elbow greease and about 20 mins of polishing, but it will get it off. its like liquid sand paper!
My dad polished "not for road use" out of his exhaust with autosol. and that was engraved in!

Good luck!

Ben!

Bod · Traffic Copper Joined: 18 Mar 2004 Karma :

thing is though I don't want to damamge the finish

mr jamez · World Chat Champion Joined: 04 Aug 2003 Karma :

Never used autosol before, but you could use a metal polish afterwards to bring back the shiny finish.

Scooby · Scrappy Doo Joined: 26 Mar 2002 Karma :

Petrol then wash it off then polish it up.
____________________
A big enough hammer fixes anything!

Finglonga · World Chat Champion Joined: 27 Jul 2004 Karma :

Scooby · Scrappy Doo Joined: 26 Mar 2002 Karma :

Bod · Traffic Copper Joined: 18 Mar 2004 Karma :

BALLS did not know that. So what can you use?

leg-end · Derestricted Danger Joined: 26 Aug 2004 Karma :

My 2002 'blade has a titanium can and pipes, the best thing to clean them with is Cif (used to be called Jif). This type of cleaner is recommended by Honda in the workshop manual. Just use a damp cloth and some Cif and plenty of water, titanium comes up like new.

Bod · Traffic Copper Joined: 18 Mar 2004 Karma :

cool will try that then. thanks
bod