Posted: 15:34 - 11 Jan 2017 Post subject: Gear Indicator / Wiring Diagram Assist Request
I bought a Gear Indicator that requires a line from my Neutral wire, along with the usual pos/neg.
This is one of those deals where I've fitted sensors to my gear shifter, so between up/down shifts the device will detect a change in gear.
Does anyone know exactly which wire, going into my dash, I'll need (e.g. colour)
Or, does anyone have a link to a wiring diagram that is for my bike:
I had one of these on some bike I had the dim and distant past. It didn't work. Cut a long story short. The earth through the neutral switch that sets it to '0' needs to be a GOOD earth. The neutral switch can sit at many Ohms above true earth due to clag in the contacts,
I got round this by activating a relay from the neutral switch supply, the secondary contacts going from the gear indicator unit to a really good chassis earth. Worked quite well after that. ____________________ The CBR900RR-T has taken shape, was the Firefighter, now with a '05 fairing and RSV swinging arm, its turned out far too good to just cruise around. The Cagiva V-Raptor 1000 is proving to be an excellent acquisition. The Clio Sport 172 has sold. A Nissan 350Z its replacement. A Falco comes into the garage, juries out on V twin=ness.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You cannot download files in this forum
Please explain your rating
Please be fair in your ratings! If your rating is revoked you will lose karma