Fazer luggage rack.

[MC900]

Hi, does anyone know the best place to get a rack so I can fit a top box to a fazer? Not sure which I need. Thanks.
____________________
Current Ride: Fazer 600 (02) & YBR125 (07)

[Beehive Bedlam]

What model?

Edit - You bought the overpriced FZS then? When I looked into luggage options a givi wing rack is the best option but good luck finding one.

You can buy racks on ebay they have a silly weight limit something like 5KG so I didn't bother.

Alternatively you could buy a spare seat and connect a box using long bolts/threaded rod with big washers on the end.

[Amber Phoenix]

https://www.beginnerbiker.com/2012/11/givi-monokey-rack-top-box/

It's just the arms that are Fazer specific (model Givi 340F).
The plate (M3) is pretty generic. As are any Monokey top boxes.

Grab the arms new, to ensure you get all the mounting bolts, brackets etc), cost ya about £65 odd.
The plate and box you can pick up second hand from any bike model going cheap on ebay local to you. Otherwise the M3 plate will set you back about £30-35 new, and a box £100-200 odd. Or look for a cheaper Kappa box, which I'm pretty sure is compatible with Givi plates.

Avoid the 'Monolock' stuff, it's the cheaper Givi stuff, that isn't as robust and can't carry as much weight.
____________________
Beginner Biker Adventures Blog
Yamaha FZ6 S2 2007

[MC900]

Ok cheers for the replies. I didn't buy the fazer from the other thread. I've bought one that has 18k miles 2002 model for a little less than what the other was going for
____________________
Current Ride: Fazer 600 (02) & YBR125 (07)

[Andy_Pagin]

I've been thinking about removing the pillion grab handle and welding up a frame to bolt in it's place for a box over the pillion seat. Not sure about the MOT legality, and getting at the seat box might prove tricky.
____________________
They're coming to take me away, ho-ho, hee-hee, ha-haaa, hey-hey,
the men in white coats are coming to take me away.
Yamaha Vity -> YBR125 -> FZS600 Fazer -> FZ1-S Fazer