Resend my activation email : Register : Log in 
BCF: Bike Chat Forums


Bandit 400 parts

Reply to topic
Bike Chat Forums Index -> Bikes & Accessories
View previous topic : View next topic  
Author Message

Fazer Tom
Spanner Monkey



Joined: 29 May 2012
Karma :

PostPosted: 23:32 - 03 Mar 2017    Post subject: Bandit 400 parts Reply with quote

Having a clearout of bandit/gsxr bits

The descriptions i have just copyed from ebay as they are all listed.

tank and panels
1989 bandit 400 tank and rear panels. These have been painted in metalic black and then had several coats of laquer. They could do with a buff as theybe been in storage for a few months.

The tank had a leak which has been repaired by a professional welder. But i would seal the tank with sealer before use.

A few lugs have broken off the plastics but they fitted on my bike okay.

Dont have the side panels

70 quid

engine

Bandit 400engine to rebuild or use as spares.

I stripped the top end down to replace a damaged cam follower and to send the head away to have new studs put in, its all ready to be built up with new gaskets.

The engine is good to go just needs a top end gasket set and reassembling. Or to strip as spares, all bits are good

Collection only as it weighs an absaloute tonne. From near barnsley

70 quid

wheels

Bandit 400 front and back wheels. I dont have any front discs as they were shot.

This is for the early bandit 400 with TWIN discs at the front.

They have been painted in gloss black and its a pretty decent finish, they have bene paited with the tyres on, they need new tyres as the ones on are worn.

The rear wheel doesnt have any cush rubbers with it.

Collection
50 quid

carbs

These carbs came off of my 1989 bandit 400, i suspect they are from a later bandit as they have a place for a tps.

They have been fully dismantled and rebuilt with a liteTek carb kit. They will need setting up, and might need new float needles as i didnt change these.

50 quid

forks

1989 bandit 400 forks. These are for the TWIN disc setup.

They have been painted in gloss black to a decent finish. They will need some dust seals. Coild probably do with some new oil inside too, im not sure how old it is.

Collection only near barnsley

50 quid

Pics are on ebay, shouldnt be hard to find, too much hassle posting all the pics.
____________________
(CBT 01/07/11. Theory, 21/05/12. MOD 1, 01/06/12. MOD 2, 3/08/12)

Past: (1981 CG125) (1992 ZZR250 x2) (1976 KZ400) (1993 400 Superfour) (2002 Triumph TT600) (1998 Fazer) (2001 CCM 636) (2000 CCM 604) (2007 Kawasaki Z750) (2005 Husqvarna SM450R) Current: (1989 Bandit 400)
 Back to top
View user's profile Send private message Send e-mail You must be logged in to rate posts
Old Thread Alert!

The last post was made 7 years, 49 days ago. Instead of replying here, would creating a new thread be more useful?
  Display posts from previous:   
This page may contain affiliate links, which means we may earn a small commission if a visitor clicks through and makes a purchase. By clicking on an affiliate link, you accept that third-party cookies will be set.

Post new topic   Reply to topic    Bike Chat Forums Index -> Bikes & Accessories All times are GMT + 1 Hour
Page 1 of 1

 
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum

Read the Terms of Use! - Powered by phpBB © phpBB Group
 

Debug Mode: ON - Server: birks (www) - Page Generation Time: 0.08 Sec - Server Load: 0.37 - MySQL Queries: 17 - Page Size: 30.75 Kb